NCP4894
Product Preview
1.0 Watt Differential Audio
Power Amplifier with
Selectable Shutdown
The NCP4894 is a differential audio power amplifier designed for
portable communication device applications. This feature and the
excellent audio characteristics of the NCP4894 are a guarantee of a
high quality sound, for example, in mobile phones applications. With
less than 0.01% distortion (THD + N), the NCP4894 is capable of
delivering 1.0 W of continuous average power to an 8.0 W load from
a 5.0 V power and still 250 mW from 2.6 V.
The NCP4894 provides high quality audio while requiring few
external components and minimal power consumption. It features a
low−power consumption shutdown mode.
http://onsemi.com
MARKING
DIAGRAMS
9−Pin Flip−Chip CSP
FC SUFFIX
xxx
YYWW
1
CASE 499E
A1
To be flexible, shutdown may be enabled by either a logic high or
low depending on the voltage applied on the SD MODE pin.
The NCP4894 contains circuitry to prevent from « pop and click »
noise that would otherwise occur during turn−on and turn−off
transitions.
Micro−10
DM SUFFIX
CASE 846B
xxxx
YWW
AWL
8
1
For maximum flexibility, the NCP4894 provides an externally
controlled gain (with resistors), as well as an externally controlled
turn−on time (with bypass capacitor).
Due to its excellent PSRR, it can be directly connected to the
battery, saving the use of an LDO.
xxx
= Specific Device Code
YY, Y = Year
WW, W = Work Week
A
WL
= Assembly Location
= Wafer Lot
This device is available in 9−Pin Flip−Chip CSP and Micro−10
packages.
PIN CONNECTIONS
9−Pin Flip−Chip CSP
Features
• Differential Amplification
• Shutdown High or Low Selectivity
• 1.0 W to an 8.0 W Load from a 5.0 V Power Supply
• Superior PSRR: Direct Connection to the Battery
• « Pop and Click » Noise Protection Circuit
• Ultra Low Current Shutdown Mode
• 2.2 V−5.5 V Operation
A1
A2
A3
INP
BYPASS OUTB
B1
VP
B2
B3
SD MODE VM
• External Gain Configuration Capability
• External Turn−on Configuration Capability
• Thermal Overload Protection Circuitry
• Pb−Free Packages are Available
C1
C2
C3
INM SD SELECT OUTA
(Top View)
Typical Applications
• Portable Electronic Devices
• PDAs
Micro−10
SD SELECT
INM
1
2
10 OUTA
VP
9
• Mobile Phones
SD MODE
INP
NC
8
7
6
3
4
5
VM
BYPASS
OUTB
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
February, 2004 − Rev. 2
NCP4894/D