NCP4896
Product Preview
1.0 Watt Audio Power
Amplifier with Earpiece
Driving Capability
The NCP4896 is an audio power amplifier designed for portable
communication device applications such as mobile phones. This part
is capable of delivering 1.0 W of continuous average power to an
http://onsemi.com
MARKING
DIAGRAM
8.0 W BTL load from a 5.0 V power supply and, 250 mW to a 4.0
W
BTL from 2.6 V power supply. It also provides the control of driving
a single−ended earpiece and delivers 90 mW from a 5.0 V power
supply to a 32 W load.
This device provides high quality audio while requiring few
external components and minimal power consumption. It features a
low−power consumption shutdown mode, which is achieved by
driving the shutdown pin with logic Low.
The NCP4896 contains circuitry to prevent from « pop and click »
noise that would otherwise occur during turn−on and turn−off
transitions. It is also efficient when switching modes from BTL to SE
and SE to BTL.
For maximum flexibility, the part provides an externally controlled
gain (with resistors), as well as an externally controlled turn−on time
(with bypass capacitor).
1
XXX
YYWW
9−PIN FLIP−CHIP CSP
FC SUFFIX
CASE 499E
A1
XXX
YY
WW
= Specific Device Code
= Year
= Work Week
PIN CONNECTIONS
9−PIN FLIP−CHIP CSP
A1
A2
A3
Due to its excellent PSRR, it can be directly connected to the
battery, saving the use of an LDO.
BYP
OUTB
SE/BTL
Features
B1
Vp
B2
B3
• Single−Ended or Differential Control
• 1.0 W to an 8.0 W BTL Load from a 5.0 V Power Supply
• Excellent PSRR: Direct Connection to the Battery
• Ultra Low Current Shutdown Mode
• 2.2 V−5.5 V Operation
NC
VM
C1
C2
C3
INM
SD
OUTA
(Top View)
• External Gain Configuration Capability
• External Turn−on Time Configuration Capability
• Thermal Overload Protection Circuitry
• Up to 1.0 nF Capacitive Load Driving Capability
• « Pop and Click » Noise Protection Circuit
• Pb−Free Package is Available
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
Typical Applications
• Portable Electronic Devices
• PDAs
• Mobile Phones
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
February, 2004 − Rev. P0
NCP4896/D