Applicable standard
Operating
Storage
-40 °C to +85 °C ( 95 %RH Max.)
-40 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
- W
-
50 Ω( 0 to 3 GHz)
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 5 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact
1000 MΩ Min.
No breakdown.
5 mΩ Max.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 1 GHz.
Frequency 1 to 3 GHz.
VSWR 1.2 Max.
VSWR 1.3 Max.
X
-
-
-
Insertion loss
Frequency - to - GHz.
- dB Max.
MECHANICAL CHARACTERISTICS
0
Contact insertion and
extraction forces
Insertion and
φ
0.45 -0.005 by steel gauge.
Insertion force
- N Max.
0.5 N Min.
- N Max.
- N Min.
-
X
-
-
X
-
Extraction force
Insertion force
Measured by applicable connector.
3000 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force
1)Contact resistance:
-
-
Center contact
Outer contact
10 mΩ Max.
10 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
1)No electrical discontinuity of 1 μs.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm,
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
X
X
-
-
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min. and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 96 %
1)Insulation resistance:
(at high humidity)
2) Insulation resistance:
(at dry)
100 MΩ Min.
1000 MΩ Min.
total 10 cycles.( 240 h)
X
X
-
-
3)No damage, crack and looseness of parts.
1)No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-40 →
- →
+85 → - °C
30 → 3 min.
30 → 3 →
Under 5 cycles.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
1) Contact resistance:
Center contact
Outer contact
50 mΩ Max.
50 mΩ Max.
X
X
-
-
2) Voltage standing wave ratio:
VSWR 1.2 Max.(Frequency 0 to 1 GHz)
VSWR 1.3 Max.(Frequency 1 to 3 GHz)
No unusual solder wettability.
Soldering conditions
Temperature 350℃ (Solidering iron bit)
Time
3 ~ 5 sec
Count
0
Description of revisions
Designed
Checked
Date
NK.NINOMIYA
MT.KANEKO
SR.AIHARA
SR.AIHARA
20231107
20231107
20231106
20231106
Remark
Approved
Checked
Designed
Drawn
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-397073-40-00
MSS-LR-PC-A(40)
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL0319-0065-0-40
FORM HD0011-2-1