Applicable standard
Operating
Storage
-40 °C to +85 °C ( 95 %RH Max.)
-40 °C to +50 °C ( 95 %RH Max.)
50 Ω( 0 to 2000 MHz)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
Rating Power
1.5D-HQEV (Fujikura Ltd.)
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 5 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 5 mΩ Max.
2000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 200 MHz.
Frequency 200 to 2000 MHz.
Frequency - to - MHz.
No flashover or breakdown.
VSWR 1.2 Max.
VSWR 1.4 Max.
--- dB Max.
X
-
-
-
Insertion loss
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ - by steel gauge.
Insertion force
Extraction force --- N Min.
Insertion force --- N Max.
--- N Max.
-
-
-
-
-
-
Measured by applicable connector.
3000 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force 9.8 to 44 N.
1)Contact resistance:
X
X
Center contact 10 mΩ Max.
Outer contact 10 mΩ Max.
2)No damage, crack and looseness of parts.
X
-
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, No damage, crack and looseness of parts.
98 m/s2 at 10 cycles for 3 directions.
-
-
X
X
490 m/s2 directions of pulse 11 ms
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of 30 mm/min. and record the strength at which
the cable or connector breaks.
49 N Min.
X
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 96 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 2000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-40 → - → +85 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min.
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.2 Max. (Frequency 0 to 200 MHz.)
VSWR 1.4 Max. (Frequency 200 to 2000 MHz.)
Count
0
Description of revisions
Designed
Checked
Date
TO.KATAYAMA
TO.KATAYAMA
NK.OOSAWA
NK.OOSAWA
18.08.09
18.08.09
18.08.09
18.08.09
Remark
Approved
Checked
Designed
Drawn
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-375503-00-00
MSS-P-1.5DV
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL319-0002-0-00
FORM HD0011-2-1