Freescale Semiconductor
Data Sheet
Document Number: MPC8610EC
Rev. 0, 10/2008
MPC8610 Integrated Host Processor
Hardware Specifications
Features
– Boot sequencer
– Optionally loads configuration data from serial ROM at
• High-performance, 32-bit e600 core, that implements the
Power Architecture™ technology
– Eleven execution units and three register files
– Two separate 32-Kbyte instruction and data level 1 (L1)
caches
2
reset via I C interface
– Can be used to initialize configuration registers and/or
memory
2
– Supports extended I C addressing mode
• DUART
• Fast InfraRed interface
• Serial peripheral interface
– Integrated 256-Kbyte, eight-way set-associative unified
instruction and data level 2 (L2) cache with ECC
– 36-bit real addressing
– Master or slave support
– Multiprocessing support features
– Power and thermal management
• MPX coherency module (MCM)
• Address translation and mapping units (ATMUs)
• DDR/DDR2 memory controller
– 64- or 32-bit data path (72-bit with ECC)
– Up to 533-MHz DDR2 data rate and up to 400 MHz
DDR data rate
• Dual integrated four-channel DMA controllers
– All channels accessible by both local and remote masters
– Supports transfers to or from any local memory or I/O
port
– Ability to start and flow control each DMA channel
from external 3-pin interface
• Watchdog timer
• Dual global timer modules
– Up to 16 Gbytes memory
• 32-bit PCI interface, 33 or 66 MHz bus frequency
• Dual PCI Express® controllers
• Enhanced local bus controller (eLBC)
– Operating at up to 133 MHz
– PCI Express 1.0a compatible
– Eight chip selects
– PCI Express controller 1 supports x1, x2, and x4 link
widths; PCI Express controller 2 supports x1, x2, x4, and
x8 link widths
• Display interface unit
– Maximum display resolution: 1280 × 1024
– Maximum display refresh rate: 60 Hz
– Display color depth: up to 24 bpp
– Display interface: parallel TTL
• OpenPIC-compliant programmable interrupt controller
(PIC)
– 2.5 Gbaud, 2.0 Gbps lane
• Device performance monitor
– Supports eight 32-bit counters that count the occurrence
of selected events
– Ability to count up to 512 counter-specific events
– Supports 64 reference events that can be counted on any
of the 8 counters
– Supports 16 programmable interrupt and processor task
priority levels
– Supports 12 discrete external interrupts and 48 internal
interrupts
– Eight global high resolution timers/counters that can
generate interrupts
– Supports duration and quantity threshold counting
– Burstiness feature that permits counting of burst events
with a programmable time between bursts
– Triggering and chaining capability
– Ability to generate an interrupt on overflow
• IEEE Std 1149.1™ compliant, JTAG boundary scan
• Available as 783-pin, flip-chip, plastic ball grid array
(FC-PBGA)
– Support for PCI Express message-shared interrupts
(MSIs)
2
• Dual I C controllers
2
– Master or slave I C mode support
© Freescale Semiconductor, Inc., 2008. All rights reserved.
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
