MC10EP116, MC100EP116
3.3 V / 5 VꢀHex Differential
Line Receiver/Driver
Description
The MC10EP116/100EP116 is a 6-bit differential line receiver
based on the EP16 device. The 3.0 GHz bandwidth provided by the
high frequency outputs makes the device ideal for buffering of very
high speed oscillators.
http://onsemi.com
MARKING
The V pin, an internally generated voltage supply, is available to
DIAGRAM*
BB
this device only. For single−ended input conditions, the unused
differential input is connected to V as a switching reference voltage.
BB
V
may also rebias AC coupled inputs. When used, decouple V
CC
BB
BB
MCxxx
EP116
AWLYYWWG
and V via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, V should be left open.
The design incorporates two stages of gain, internal to the device,
making it an excellent choice for use in high bandwidth amplifier
applications.
BB
LQFP−32
FA SUFFIX
CASE 873A
The differential inputs have internal clamp structures which will
force the Q output of a gate in an open input condition to go to a LOW
state. Thus, inputs of unused gates can be left open and will not affect
the operation of the rest of the device. Note that the input clamp will
1
MCxxx
EP116
32
1
take affect only if both inputs fall 2.5 V below V
.
CC
AWLYYWWG
QFN32
MN SUFFIX
CASE 488AM
The 100 Series contains temperature compensation.
G
Features
• 260 ps Typical Propagation Delay
• Maximum Frequency > 3 GHz Typical
xxx
A
= 10 or 100
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
• PECL Mode Operating Range: V = 3.0 V to 5.5 V
CC
with V = 0 V
EE
• NECL Mode Operating Range: V = 0 V
CC
G or G = Pb−Free Package
with V = −3.0 V to −5.5 V
EE
(Note: Microdot may be in either location)
• Open Input Default State
• Safety Clamp on Inputs
*For additional marking information, refer to
Application Note AND8002/D.
• Q Output Will Default LOW with Inputs Open or at V
EE
• V Output
• Pb−Free Packages are Available
BB
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
December, 2006 − Rev. 11
MC10EP116/D