Click here to ask an associate for production status of specific part numbers.
3.15A USB Type-C Autonomous Charger with
MAX77787
JEITA for 1-Cell Li-ion/LiFePO4 Batteries
General Description
Benefits and Features
The MAX77787 is a standalone, 3.15A charger with
integrated USB Type-C CC detection and reverse-boost
•
•
•
•
Up to 16V Protection
13.4V Maximum Input Operating Voltage
3.15A Maximum Charging Current
®
capability. The fast-charge current and termination
voltage is easily configured with resistors. The IC operates
with an input voltage of 4.5V to 13.4V and has a maximum
input current limit of 3A. The IC also implements the
adaptive input current limit (AICL) function that regulates
the input voltage by reducing input current to prevent the
voltage of a weak adapter from collapsing or folding back.
6A Discharge Current Protection
• No Firmware or Communication Required
• Integrated CC Detection for USB Type-C
• Integrated BC1.2 Detection for Legacy SDP, DCP,
CDP, and DCD Timeout
• Integrated USB Detection for Common Proprietary
Charger Types
• Automatic Input Current Limit Configuration
• Input Voltage Regulation with Adaptive Input
Current Limit (AICL)
The USB Type-C Configuration Channel (CC) detection
pins on the IC enable automatic USB Type-C power
source detection and input current limit configuration
without any software control as soon as the USB plug is
inserted. The IC also integrates BC1.2 and proprietary
adapter detection using the D+ and D- pins.
•
•
5.1V, 1.5A OTG Mode and BYP Reverse Boost
Safety
• Charge Safety Timer
• JEITA Compliance with NTC Thermistor Monitor
• Thermal Shutdown
The IC offers reverse-boost capability up to 5.1V, 1.5A,
that can be enabled with the ENBST pin, also BYP
reverse-boost that can be enabled with the ENBST and
STBY pin combination. The STAT pin indicates charging
status, while the INOKB pin indicates valid input voltage.
Charging can be stopped by pulling the CHGENB pin low.
•
Pin Control of all Functions
• Resistor Configurable Fast-Charge Current/Input
Current Limit/Termination Voltage
• ENBST Pin to Enable and Disable Reverse Boost
• STAT Pin to Indicate Charging Status
• INOKB Pin to Indicate Input Power-OK
• CHGENB Pin to Enable and Disable Charging
• STBY Pin to Support Suspend Mode
• THM Pin to Monitor Thermistor
The IC is equipped with a Smart Power Selector™ and a
battery true-disconnect FET to control the charging and
discharging of the battery or isolate the battery in case of
a fault. The IC supports Li-ion batteries with JEITA
compliance. It also has another option that supports
LiFePO4 batteries with non-JEITA compliance. The IC
comes in a 2.758mm x 2.758mm, 0.4mm pitch, 6 x 6
wafer-level package (WLP) making it suitable for low-cost
PCB assembly.
•
•
•
Integrated Power Path
Integrated Battery True-Disconnect FET
2.758mm x 2.758mm, 6 x 6 WLP
Applications
•
•
•
•
•
•
•
Mobile Point-of-Sale (mPOS) Terminals
Portable Medical Devices
Wireless Headphones
GPS Trackers
Charging Cradles for Wearable Devices
Power Banks
Mobile Routers
USB Type-C is a registered trademark of USB Implementers Forum.
Smart Power Selector is a trademark of Maxim Integrated Products, Inc.
19-101433; Rev 1; 5/23
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.