Click here to ask an associate for production status of specific part numbers.
MAX77789
14VIN, 3AOUT 1-Cell Charger with Integrated
USB Type-C Detection, DRP, and OTG
General Description
Benefits and Features
The MAX77789 is a standalone, 3.15A charger with
integrated USB Type-C CC detection and reverse-
•
•
•
•
•
•
•
•
Up to 16V Protection
®
13.4V Maximum Input Operating Voltage
3.15A Maximum Charging Current
6A Discharge Current Protection
Integrated CC Detection for USB Type-C
Supporting Dual Role Port (DRP)
DP/DN Manual Control for the HVDCP
Integrated BC1.2 Detection for Legacy SDP, DCP,
CDP, and DCD Timeout
Integrated USB Detection for Common Proprietary
Charger Types
Automatic Input Current Limit Configuration
Input Voltage Regulation with Adaptive Input Current
Limit (AICL)
boost capability. The IC operates with an input voltage
of 4.6V to 13.4V and has a maximum input current limit
of 3A. The IC also implements the adaptive input current
limit (AICL) function that regulates the input voltage by
reducing input current, to prevent the voltage of a weak
adapter from collapsing or folding back.
The USB Type-C Configuration Channel (CC) detection
pins on the IC is operating in DRP (Dual Role Port) as a
default and is capable of automatic USB Type-C power
source detection and sink devices. To support a variety
of legacy USB as well as proprietary adapters, the
device also integrates BC1.2 detection using the D+ and
D- pins. The IC runs the CC pin and BC1.2 detection
automatically as soon as the USB plug is inserted
without any software control.
•
•
•
•
•
5.1V, 1.5A OTG Mode and BYP Reverse Boost
Safety
• Charge Safety Timer
• JEITA Compliance with NTC Thermistor Monitor
• Thermal Shutdown
The IC offers reverse-boost capability up to 5.1V, 1.5A,
which can be enabled with automatic way or register set
by system MCU. The STAT1 pin indicates charging
status, while the INOKB pin indicates valid input voltage.
The EXTSM pin can be used to exit ship mode and force
system to reset (POR), and STAT2 pin indicates fault
detection and charger detection done indication by
register bit selection.
•
Pin Control of all Functions
• STAT1 Pin to Indicate Charging Status
• STAT2 Pin to Indicate Fault and Charger Type
Detection Complete
• INOKB Pin to Indicate Input Power-OK
• EXTSM Pin to Exit Ship Mode and System POR
• STBY Pin to Support Suspend Mode
• THM Pin to Monitor Thermistor
The IC is equipped with a Smart Power Selector™ and
a battery true-disconnect FET to control the charging
and discharging of the battery or isolate the battery in
case of a fault. The IC supports Li-ion and LiFePO4
batteries with various termination voltages from 3.6V to
4.55V. The IC comes in a 2.85mm x 2.85mm, 0.4mm
pitch, 6 x 6 wafer-level package (WLP) making it suitable
for low-cost PCB assembly.
•
•
•
•
Integrated Power Path
Integrated Battery True-Disconnect FET
I2C Compatible with INTB
2.85mm x 2.85mm, 6x6 WLP Package
Ordering Information appears at end of data sheet.
Applications
•
•
•
•
•
•
•
Mobile Point-of-Sale (mPOS) Terminals
Portable Medical Devices
Wireless Headphones
GPS Trackers
Charging Cradles for Wearable Devices
Power Banks
Mobile Routers
USB Type-C is a registered trademark of USB Implementers Forum.
19-101660; Rev 1; 7/23
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.