Click here to ask an associate for production status of specific part numbers.
MAX77757
3.15A USB Type-C Autonomous Charger with
JEITA for 1-Cell Li-ion/LiFePO4 Batteries
Benefits and Features
General Description
•
•
•
•
Up to 16V Protection
The MAX77757 is a standalone 3.15A charger with
13.7V Maximum Input Operating Voltage
3.15A Maximum Charging Current
6A Discharge Current Protection
• No Firmware or Communication Required
• Integrated CC Detection for USB Type-C
• Integrated BC1.2 Detection for Legacy SDP,
DCP, CDP, and DCD Timeout
®
integrated USB Type-C CC detection with JEITA
compliance that supports reverse boost capability. The
fast-charge current is easily configured with resistors.
The MAX77757 operates with an input voltage of 4.5V
to 13.7V and has a maximum input current limit of 3A.
The IC also implements the adaptive input current limit
(AICL) function that regulates the input voltage by
reducing input current to prevent the voltage of a weak
adapter from collapsing or folding back.
• Integrated USB Detection for Common
Proprietary Charger Types
• Automatic Input Current Limit Configuration
• Input Voltage Regulation with Adaptive Input
Current Limit (AICL)
The USB Type-C Configuration Channel (CC) detection
pins on the MAX77757 enable automatic USB Type-C
power source detection and input current limit
configuration. To support a variety of legacy USB types
as well as proprietary adapters, the IC also integrates
BC1.2 detection using the D+ and D- pins. The IC runs
the CC pin and BC1.2 detection automatically as soon
as a USB plug is inserted without any software control.
•
•
Reverse Boost Capability up to 5.1V, 1.5A
Termination Voltage
• 4.1V to 4.5V for Li-ion and Li-poly Batteries
• 3.6V/3.7V for LiFePO4 Battery
•
Safety
• Charge Safety Timer
• JEITA Compliance with NTC Thermistor
(MAX77757J)
• HOT/COLD Stop Charging with NTC Thermistor
(MAX77757H)
The IC also offers reverse-boost capability up to 5.1V
and 1.5A, which can be enabled with the ENBST pin.
The STAT pin indicates charging status while the INOKB
pin indicates valid input voltage. Charging can be
stopped by pulling the THM pin low.
• Thermal Shutdown
The MAX77757 is equipped with a Smart Power
Selector™ and a battery true-disconnect FET to control
the charging and discharging of the battery or to isolate
the battery in case of a fault. The MAX77757 is offered
in several variants to support Li-ion batteries with various
termination voltages from 4.1V to 4.5V. It also has a 3.6V
termination voltage option for LiFePO4 batteries. The IC
comes in a 3mm x 3mm, 0.4mm pitch, 24-lead FC2QFN
package making it suitable for low-cost PCB assembly.
•
Pin Control of All Functions
• Resistor Configurable Fast-Charge Current
• ENBST Pin to Enable and Disable Reverse Boost
• STAT Pin to Indicate Charging Status
• INOKB Pin to Indicate Input Power-OK
• THM Pin to Disable Charge
•
•
•
Integrated Power Path
Integrated Battery True-Disconnect FET
3mm x 3mm, 24-Lead FC2QFN Package
Applications
Ordering Information appears at end of data sheet.
•
•
•
•
•
•
•
Mobile Point-of-Sale (mPOS) Terminals
Portable Medical Devices
Wireless Headphones
GPS Trackers
Charging Cradles for Wearable Devices
Power Banks
Mobile Routers
19-100986; Rev 1; 3/21