MAX77785/MAX77786
18.2VIN, 3.5A/5.5A 1-Cell Li+
Battery Charger for USB Type-C
Power Delivery
Benefits and Features
General Description
The MAX77785/MAX77786 is a high-performance high-
•
High-Efficiency Single-Cell Switching Charger
• Up to 5.5A Charging with MAX77786
input 3.5/5.5A fast charger with Smart Power SelectorTM
.
The ICs can operate as a reverse boost converter
without an additional inductor, allowing the battery to
share its power through the charging port, and offer
programmable output voltage from 4.505V to 10.805V.
The devices feature fully integrated low-loss power
switches to provide a small solution size and high
efficiency, even at high input voltage and high charging
current. Its high switching frequency allows the use of a
smaller-sized inductor. The ICs feature true load
disconnection in reverse boost mode and have an
adjustable output current protection limit. The device is
• Up to 3.5A Charging with MAX77785
• 90% Buck Efficiency at 4A, 15V Input
• Up to 5.5A Input Current Limit with AICL
(MAX77786)
• Up to 3.5A Input Current Limit with AICL
(MAX77785)
•
•
•
+26V Absolute Maximum Input Voltage Rating
4.7V to 18.2V Input Operating Voltage Range
Reverse Boost with Programmable Output Voltage
Options up to 10.805V
2
highly flexible and programmable through I C
configuration. Li-ion, Li-polymer, and LiFePO battery
4
• Up to 16.2W for MAX77786
chemistries are supported. It can also provide fast
programmable unplug detection of sources for dynamic
system load management. To support a variety of legacy
USBs as well as proprietary adapters, the device also
integrates BC1.2 detection using the D+ and D- pins.
• Up to 10.8W for MAX77785
• Dedicated Boost enable input
•
•
Integrated Battery True-Disconnect FET
• R
= 7.7mΩ
DSON
• Programmable Discharge Current Limit up to 10A
• Shipping Mode and Low Battery Leakage Current
• 1.3MHz Switching Frequency with 1μH Inductor
• Disconnect Input (DISQBAT)
The battery charger includes a Smart Power Selector to
accommodate a wide range of battery sizes and system
loads. The Smart Power Selector allows the system to
start up gracefully when an input source is available,
even when the battery is deeply discharged (dead
battery) or missing. It can be configured so that when
power is applied to the charger input, the battery
charging can automatically start.
Safety
• Battery Temperature Sensing and Charge Safety
Timer
• JEITA Guideline Compliant
• Thermal Regulation and Thermal Shutdown
• System Voltage OVLO/UVLO
Applications
•
•
•
•
•
•
•
•
USB Switch with BC1.2 Detection
Spread Spectrum for Noise-Sensitive Applications
Charge Status Output for LED
•
•
•
•
Gaming Devices
VR Applications
mPOS
Push-Button Input for Exiting from Ship Mode
Programmable Unplug Detection Output
Dedicated Input for Suspend Mode (SUSPND)
Tablet PCs
Smart Power Selector is a trademark of Maxim Integrated
Products, Inc
2
I C Interface
2.96 mm x 2.96 mm WLP
USB Type-C is a registered trademark of USB Implementers
Forum, Inc.
Ordering Information appears at end of data sheet.
Power Path is a trademark of Linear Technology Corporation.
19-101772; Rev 0; 2/24
© 2024 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.