EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX77734
Ultra-Low Power Tiny PMIC with Power Path
Charger for Small Li+ and 150mA LDO
General Description
Benefits and Features
The MAX77734 is a tiny PMIC for applications where size
and simplicity are critical. The IC integrates a linear-mode
Li+ battery charger, low-dropout linear regulator (LDO),
analog multiplexer, and dual-channel current sink driver.
● Extends Battery Life
• 200nA Factory-Ship Mode for Long Shelf Life
• 500nA Shutdown Current
• 4.5μA Quiescent Current with LDO Enabled
• Charger Allows Battery to Relax after Charging
The charger is designed for small-battery systems
that require accurate termination as low as 0.375mA.
The circuit can instantly regulate the system voltage
when an input source is connected even if the battery is
depleted.
● Linear Charger Optimized for Small Battery Size
• 7.5mA to 300mA Fast-Charge Current
• Battery Regulation Voltage from 3.6V to 4.6V
• Accurate Termination Current as low as 0.375mA
• Instant-On Functionality provided by Maxim's
Smart Power Selector™
The 150mA LDO's output is programmable between 0.8V
2
and 3.975V with I C. The analog MUX enables an exter-
• JEITA Battery Temperature Monitors for Safe
Charging
nal ADC to perform conversions on battery V&I signals
for power monitoring. The current sinks are capable of
sinking 12.8mA each and can be programmed for LEDs
to blink in custom patterns.
● Highly Integrated
• 150mA LDO with Power-OK Output
• Dual-Channel Current Sink for LEDs
• Analog Multiplexer for Power Monitoring
• Watchdog Timer
The MAX77734 is available in a 20-bump, 0.4mm pitch
wafer-level package (WLP). For a similar product with
additional regulators, see the MAX77650.
• On-Key Input for LDO Enable and Manual Reset
Applications
● Small Size
● Hearables: Headsets, Headphones, Earbuds
● Fitness Bands and other Bluetooth Wearables
● Action Cameras, Wearable/Body Cameras
● Low-Power Internet of Things (IoT) Gadgets
• 2.23mm x 1.97mm (0.5mm max height) WLP
• 20-Bump, 0.4mm Pitch, 4 x 5 Array
Ordering Information appears at end of data sheet.
Simplified Application Circuit
5V DC INPUT
CHGIN
4.5V
12.25mm2 SOLUTION SIZE
3.43mm
SYS
SYSTEM
V
L
4.7μF
1μF
MAX77734
22μF
INLDO
LDO
GND
1.8V/3.3V
OUTPUT
CCHGIN
CVL
nENLDO
2.2μF
ON-KEY
V
IO
BATT
THM
POKLDO
SDA
POWER-OK
4.7μF
Li+
TBIAS
SCL
SERIAL HOST
NTC
CLDO
nIRQ
SYS
SNK1
SNK2
PMLDO
AMUX
LDO MODE CONTROL
TO SYSTEM ADC
● 0.2mm COMPONENT PITCH
● PULLUP RESISTORS NOT DRAWN
● BLANK SPACE NOT EXCLUDED
POWER PATH LINEAR CHARGER WITH 0.375mA TERMINATION AND DUAL-CHANNEL CURRENT SINKS
Smart Power Selector is a trademark of Maxim Integrated Products, Inc.
19-100062; Rev 5; 7/20