Evaluation Kit
Available
Design
Resources
Tools
and Models
Support
Click here to ask an associate for production status of specific part numbers.
±1°C, SMBus-Compatible Remote/
Local Temperature Sensor with
Overtemperature Alarm
MAX6642
General Description
Benefits and Features
● Integrated Temperature Sensor Enables Simultaneous
Dual Temperature (Remote and Local) Measurements
• Remote Accuracy ±1°C
The MAX6642 precise, two-channel digital temperature
sensor accurately measures the temperature of its own
die and a remote PN junction and reports the temperature
data over a 2-wire serial interface. The remote PN junction
is typically a substrate PNP transistor on the die of a CPU,
ASIC, GPU, or FPGA. The remote PN junction can also be
a discrete diode-connected small-signal transistor.
• Local Accuracy ±2°C from +60°C to +100°C
• Measures Remote Temperature up to +150°C
• 0.25°C Resolution
● Dual Zone Monitoring Automates Over-Temperature
The 2-wire serial interface accepts standard system
management bus (SMBus™), Write Byte, Read Byte,
Send Byte, and Receive Byte commands to read the
temperature data and to program the alarm thresholds.
To enhance system reliability, the MAX6642 includes
an SMBus timeout. The temperature data format is 10
bit with the least significant bit (LSB) corresponding to
+0.25°C. The ALERT output asserts when the local or
remote overtemperature thresholds are violated. A fault
queue may be used to prevent the ALERT output from
setting until two consecutive faults have been detected.
Alarms
• Programmable Remote/Local Temperature
Thresholds
• ALERT Output
● Small Footprint
• 3mm x 3mm TDFN Package with Exposed Pad
• Low Thermal Mass Reduces Measurement Latency
• SMBus/I C Address Hardwired
2
Ordering Information
PART
TEMP RANGE
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
PIN-PACKAGE
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
Measurements can be done autonomously or in a single-
shot mode.
MAX6642ATT90-T
MAX6642ATT92-T
MAX6642ATT94-T
MAX6642ATT96-T
MAX6642ATT98-T
MAX6642ATT9A-T
MAX6642ATT9C-T
MAX6642ATT9E-T
Remote accuracy is ±1°C maximum error between +60°C
and +100°C. The MAX6642 operates from -40°C to
+125°C, and measures remote temperatures between
0°C and +150°C. The MAX6642 is available in a 6-pin
TDFN package with an exposed pad.
Applications
● Desktop Computers
● Notebook Computers
● Servers
● Test and Measurement
● Workstations
● Graphic Cards
T = Tape and reel.
*EP = Exposed pad.
Pin Configuration and Functional Diagram appear at end of
data sheet.
● Thin Clients
Selector Guide
Typical Operating Circuit
TOP
MARK
3.3V
PART
MEASURED TEMP RANGE
0.1µF
47Ω
MAX6642ATT90-T
MAX6642ATT92-T
MAX6642ATT94-T
MAX6642ATT96-T
MAX6642ATT98-T
MAX6642ATT9A-T
MAX6642ATT9C-T
MAX6642ATT9E-T
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
AFC
AFD
AFE
AFF
AEW
AFG
AFH
AFI
10kΩ EACH
V
CC
MAX6642
2200pF
SDA
DATA
DXP
SCLK
CLOCK
ALERT
INTERRUPT TO µP
GND
µP
19-2920; Rev 6; 5/22
SMBus is a trademark of Intel Corp.
©
2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2022 Analog Devices, Inc. All rights reserved.
|
|