EVALUATION KIT AVAILABLE
±±1°C, MꢀBus°ꢁompatibl,ꢂloꢁale
Lꢁcpb,TlomlrpaBrl, lnuꢁr,wtah
OvlralomlrpaBrl,Abpro
MAX6642
Glnlrpb,Dlucrtmatꢁn
ꢀlnlftau,pnd,FlpaBrlu
The MAX6642 precise, two-channel digital temperature
sensor accurately measures the temperature of its own
die and a remote PN junction and reports the tempera-
ture data over a 2-wire serial interface. The remote PN
junction is typically a substrate PNP transistor on the
die of a CPU, ASIC, GPU, or FPGA. The remote PN
junction can also be a discrete diode-connected small-
signal transistor.
• Integrated Temperature Sensor Enables Simultaneous
Dual Temperature (Remote and Local) Measurements
• Remote Accuracy ±±1°
• Local Accuracy ±ꢀ1° ꢁrom ꢂ+61° to ꢂ±661°
• Measures Remote Temperature up to ꢂ±561°
• 6.ꢀ51° Resolution
• Dual Zone Monitoring Automates Over-Temperature
Alarms
The 2-wire serial interface accepts standard system
management bus (SMBus™), Write Byte, Read Byte,
Send Byte, and Receive Byte commands to read the
temperature data and to program the alarm thresholds.
To enhance system reliability, the MAX6642 includes an
SMBus timeout. The temperature data format is 10 bit
with the least significant bit (LSB) corresponding to
+0.25°C. The ALERT output asserts when the local or
remote overtemperature thresholds are violated. A fault
queue may be used to prevent the ALERT output from
setting until two consecutive faults have been detected.
• Programmable Remote/Local Temperature
Thresholds
• ALERT Output
• Small Footprint
• 3mm x 3mm TDFN Package with Exposed Pad
• Low Thermal Mass Reduces Measurement Latency
ꢀ
• SMBus/I ° Address Hardwired
Ordlrtng,Infꢁropatꢁn
PART
TEMP RANGE
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
PIN-PACKAGE
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
6 TDFN-EP*
Measurements can be done autonomously or in a sin-
gle-shot mode.
MAX6642ATT90-T
MAX6642ATT92-T
MAX6642ATT94-T
MAX6642ATT96-T
MAX6642ATT98-T
MAX6642ATT9A-T
MAX6642ATT9C-T
MAX6642ATT9E-T
Remote accuracy is 1°C maꢀimum error between
+60°C and +100°C. The MAX6642 operates from -40°C
to +125°C, and measures remote temperatures
between 0°C and +150°C. The MAX6642 is available in
a 6-pin TDFN package with an eꢀposed pad.
Ammbtcpatꢁnu
Desktop Computers
Notebook Computers
Servers
T = Tape and reel.
*EP = Eꢀposed pad.
Thin Clients
Test and Measurement
Workstations
Pin Configuration and Functional Diagram appear at end of
data sheet.
Tymtcpb,Omlrpatng,°trcBta
Graphic Cards
3.3V
lblcaꢁr,GBtdl
0.1µF
47Ω
TOP
MARK
PART
MEASURED TEMP RANGE
10kΩ EACH
V
CC
MAX6642ATT90-T
MAX6642ATT92-T
MAX6642ATT94-T
MAX6642ATT96-T
MAX6642ATT98-T
MAX6642ATT9A-T
MAX6642ATT9C-T
MAX6642ATT9E-T
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
0°C to +150°C
AFC
AFD
AFE
AFF
AEW
AFG
AFH
AFI
2200pF
MAX6642
SDA
DATA
DXP
SCLK
CLOCK
ALERT
INTERRUPT TO µP
GND
µP
SMBus is a trademark of Intel Corp.
19-2920; Rev 5; 11/15