Click here to ask an associate for production status of specific part numbers.
Wearable Power-Management Solution
MAX20356
Benefits and Features
General Description
•
Extend Time Between Charges
The MAX20356 is a highly integrated and programmable
power-management solution designed for ultra-low-
power wearable applications. It is optimized for size and
efficiency to enhance the value of the end product by
extending battery life and shrinking the overall solution
size. A flexible set of power-optimized voltage regulators
• 3 x Nano-I , 400mA Buck Regulators (I
=
Q
Q
400nA typ)
- 0.500V to 1.130V in 10mV Steps
- 0.500V to 2.075V in 25mV Steps
- 0.500V to 3.650V in 50mV Steps
• 2 x Micro-I LDO/Load Switches (I = 1μA typ)
including multiple buck converters,
a buck-boost
Q
Q
converter, and linear regulators provide a high level of
integration and the ability to create a fully optimized
power architecture. The quiescent current of each
regulator is ultra-low to extend battery life in always-on
applications.
- 1.71V to 5.5V Input-Voltage Range
- 100mA Output-Current Capability
- 0.900V to 4.0V in 100mV Steps
•
Nano-I Fast Transient LDO (I = 820nA typ)
Q
Q
- Optimized for use with Sensor AFEs
- 1.71V to 5.5V Input-Voltage Range
- 100mA Output-Current Capability
- 0.900V to 4.075V in 25mV Steps
The MAX20356 includes
a
complete battery-
management solution with battery seal, charger, power
path, and fuel gauge. Both thermal management and
input protection are built into the charger. The device
also includes a factory-programmable button controller
with multiple inputs that are customizable to fit specific
product user requirements.
• Nano-I Real-Time Clock LDO (I = 200nA typ)
Q
Q
- Always-On Configurable for RTCs in µC
Timers
- 1.2V [+25mV, +50mV] and 1.8V [+25mV,
+50mV]
A low-noise, 1.5W buck-boost converter provides highly
efficient and clean power conversion required for the
LEDs used in optical heart-rate systems such as PPG
• Micro-I Buck-Boost Regulator (I = 2μA typ)
Q
Q
- 1.5W Output
- 2.6V to 5.5V in 50mV Steps
- Dynamic Voltage Scaling
and SPO measurements. The MAX20356 is also
2
equipped with a nano I fast transient LDO, optimized
Q
• 3 x Nano-I , Low On-Resistance Load Switches
Q
for use in analog front-end (AFE) sensors. The
(I = 260nA typ)
Q
2
MAX20356 is configurable through an I C interface that
- Low 0.25Ω (typ) On-Resistance
- Short-Circuit Protection
- Soft-Start Feature
allows for programming various functions and reading
the device status, including the ability to read
temperature and supply voltages through the monitor
multiplexer.
•
Easy-to-Implement Li+ Battery Charging
• Wide Fast Charge Current Range: 4mA to
500mA
• +28V/-5.5V Tolerant Input
• Programmable JEITA Current/Voltage Profiles
• Programmable Automatic Step-Charging
The MAX20356 is available in a 63-bump, 0.5mm pitch,
3.71mm x 4.48mm, wafer-level package (WLP) and
operates over the -40°C to +85°C extended temperature
range.
•
•
•
Seamless Interaction with MAX20361 Solar Energy
Harvester
Multiple-Purpose Control Pins are Provided for
Flexible Control
Minimize Solution Footprint Through High Integration
• Programmable Push-Button Controller
• Programmable Supply Sequencing
• Battery Seal Shipping Mode
Applications
•
•
Wearable Devices
IoT
ModelGauge is a trademark of Maxim Integrated Products, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
• On-Chip Voltage/Charge Current Monitor Mux
Ordering Information appears at end of data sheet.
19-101659; Rev 0; 3/23
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.