Click here to ask an associate for production status of specific part numbers.
MAX20360
PMIC with Ultra-Low I Regulators, Charger,
Q
Fuel Gauge, and Haptic Driver for
Small Li+ System
General Description
Benefits and Features
The MAX20360 is a highly integrated and programmable
power management solution designed for ultra-low-power
wearable applications. It is optimized for size and efficien-
cy to enhance the value of the end product by extending
battery life and shrinking the overall solution size. A flex-
ible set of power-optimized voltage regulators, including
multiple buck, boost and buck-boost converters, and lin-
ear regulators, provides a high level of integration and the
ability to create a fully optimized power architecture. The
quiescent current of each regulator is ultra-low targeted at
extending battery life in always-on applications.
● Extend Battery-Use Time Between Battery Charging
• 2 x Micro-I , 400mA Buck Regulators (330nA I
Q
Q
typ each)
• 0.550V to 1.180V in 10mV Steps
• 0.550V to 2.125V in 25mV Steps
• 0.550V to 3.700V in 50mV Steps
• Micro-I , 600mA Buck Regulator (330nA I typ)
Q
Q
• 0.550V to 1.180V in 10mV Steps
• 0.550V to 2.125V in 25mV Steps
• 0.550V to 3.700V in 50mV Steps
• Micro-I LV LDO/Load Switch (1µA I typ)
Q
Q
The MAX20360 includes a complete battery management
solution with battery seal, charger, power path, and fuel
gauge. Both thermal management and input protection
are built into the charger. The device also includes a facto-
ry programmable button controller with multiple inputs that
are customizable to fit specific product UX requirements.
• 1.0V to 2.0V Input Voltage
• 50mA Output
• 0.5V to 1.95V Output, 25mV Steps
• Micro-I LDO/Load Switch (1µA I typ)
Q
Q
• 1.71V to 5.5V Input Voltage
• 100mA Output
• 0.9V to 4V, 100mV Steps
Three integrated LED current sinks are included for indica-
tor or backlighting functions, and an ERM/LRA driver with
automatic resonance tracking is capable of providing so-
phisticated haptic feedback to the user. A low noise, 1.5W
buck-boost converter provides a clean way to power LEDs
commonly used in optical heart-rate systems. The device
• Micro-I Buck-Boost Regulator (2µA I typ)
Q
Q
• 1.5W Output
• 2.6V to 5V in 50mV Steps
● Easy-to-Implement Li+ Battery Charging
2
is configurable through an I C interface that allows for pro-
• Wide Fast Charge Current Range: 5mA to 500mA
• 28V/-5.5V Tolerant Input
• Programmable JEITA Current/Voltage Profiles
gramming various functions and reading the device status,
including the ability to read temperature and supply volt-
ages with the integrated ADC. This device is available in
a 72-bump, 0.5mm pitch, 4.88mm x 4.19mm, wafer-level
package (WLP) and operates over the -40°C to +85°C ex-
tended temperature range.
● Minimize Solution Footprint through High Integration
• 3.3V or 5.0V Safe Output LDO
• 15mA When CHGIN Present
• ERM/LRA Haptic Driver
• Automatic Braking (LRA Only)
• Automatic Resonance Tracking (LRA Only)
Applications
● Wearable Devices
● IoT
● Supports a Wide Variety of Display Options
• Micro-I Boost Regulator (2.4µA I typ)
Q
Q
• 300mW Output
• 5V to 20V in 250mV Steps
• 3-Channel Current Sinks
• 20V Tolerant
• Programmable from 0.6mA to 30mA
• Optimize System Control
• Programmable Push-Button Controller
• Programmable Supply Sequencing
• Factory Shelf Mode
• On-Chip Voltage/Charge Current Monitor Mux
and Analog-to-Digital Converter (ADC)
19-100850; Rev 10; 2/23
Ordering Information appears at end of data sheet.
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2023 Analog Devices, Inc. All rights reserved.