MADR-008851-000100
PIN Diode Driver for Series / Shunt High Power Switches
Rev. V1P
Features
Pin Configuration
High Drive Current Capability (Up to 50 mA)
Up to 32V Back Bias in Off State
Single CMOS Logic Input
Fast Switching
Low Current Consumption
Land Grid Array Package for SMT Applications
260°C Reflow Compatible
Pin No.
Pin Name
Pin No.
Pin Name
1
2
3
4
VCC
GND
13
14
15
16
GND
SH2
C1 (Logic)
GND
GND
RX Drive
RoHS* Compliant
Tape and Reel Packaging Available
5
6
7
8
VDD
GND
GND
GND
17
18
19
20
GND
GND
GND
GND
Description
M/A-COM’s MADR-008851-000100 Switch Driver is
designed to work with M/A-COM’s line of series /
shunt SPDT HMIC switches which operate in the
power range of approximately 5 to 20W CW. It is
capable to provide forward bias currents up to 50
mA for each diode in the series/shunt switch, with
back bias voltage configurable from 12V to 32 V. It is
packaged in a Land Grid Array surface mount
package and is available in tape and reel packaging
for high volume applications.
9
GND
TX Drive
GND
21
22
23
-
GND
GND
GND
-
10
11
12
SH1
Sample boards are available with M/A-COM 20W
switch MASW-000834-13560T.
Handling Procedures
Please observe the following precautions to avoid
damage:
Ordering Information 1
Part Number
Package
Static Sensitivity
MADR-008851-000100
Bulk Packaging
Silicon Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
MADR-008851-0001TR
MADR-008851-0001TB
300 piece Reel
Sample Board with Driver &
MASW-000834-13560T Switch
1. Reference Application Note M513 for reel size information.
Moisture Sensitivity
The MSL rating for this part is defined as Level 3
per IPC/JEDEC J-STD-020. Parts shall be stored
and/or baked as required for MSL Level 3 parts.
* Restrictions on Hazardous Substances, European Union Directive
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.