Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LMH2100
SNWS020C –NOVEMBER 2007–REVISED OCTOBER 2015
LMH2100 50-MHz to 4-GHz 40-dB Logarithmic Power Detector for CDMA and WCDMA
1 Features
3 Description
The LMH2100 is a 40-dB RF power detector intended
for use in CDMA and WCDMA applications. The
device has an RF frequency range from 50 MHz to
4 GHz. It provides an accurate temperature and
supply compensated output voltage that relates
linearly to the RF input power in dBm. The circuit
operates with a single supply from 2.7 V to 3.3 V.
1
•
•
•
•
•
•
•
•
Supply Voltage: 2.7 V to 3.3 V
Output Voltage: 0.3 V to 2 V
40-dB Linear in dB Power Detection Range
Shutdown
Multi-Band Operation from 50 MHz to 4 GHz
0.5-dB Accurate Temperature Compensation
External Configurable Output Filter Bandwidth
0.4-mm Pitch DSBGA Package
The LMH2100 has an RF power detection range from
−45 dBm to −5 dBm, and is ideally suited for direct
use in combination with a 30-dB directional coupler.
Additional low-pass filtering of the output signal can
be realized by means of an external resistor and
capacitor. Typical Application: Output RC Low Pass
Filter shows a detector with an additional output low
pass filter. The filter frequency is set with RS and CS.
2 Applications
•
•
•
•
UMTS/CDMA/WCDMA RF Power Control
GSM/GPRS RF Power Control
PA Modules
Typical Application: Feedback (R)C Low Pass Filter
shows a detector with an additional feedback low
pass filter. Resistor RP is optional and will lower the
Trans impedance gain (RTRANS). The filter frequency
IEEE 802.11b, g (WLAN)
is set with CP//CTRANS and RP//RTRANS
.
The device is active for Enable = High; otherwise it is
in a low power-consumption shutdown mode. To save
power and prevent discharge of an external filter
capacitance, the output (OUT) is high-impedance
during shutdown.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (MAX)
LMH2100
DSBGA (6)
1.274 mm × 0.874 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application: Output RC Low Pass Filter
Typical Application: Feedback (R)C Low Pass
Filter
COUPLER
ANTENNA
RF
PA
COUPLER
ANTENNA
RF
PA
50 W
VDD
50 W
VDD
RS
RFIN
EN
OUT
REF
1
6
+
-
2
RFIN
EN
CS
OUT
ADC
1
LMH2100
2
6
+
-
LMH2100
RP
CP
ADC
4
5
3
GND
REF
4
5
3
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.