FEATURES
• 15 WATTS MAXIMUM OUTPU POWER
• SINGLE OUTPUT UP TO 4A
• SMALL SIZE AND LOW PROFILE:1.10 x 0.94 x 0.34 INCH
• HIGH EFFICIENCY UP TO 87%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• FIXED SWITCHING FREQUENCY
• INPUT TO OUTPUT ISOLATION (BASIC INSULATION)
• INDUSTRY STANDARD PIN-OUT FEC15 SERIES COMPATIBLE
• SURFACE-MOUNT OR THROUGH-HOLE
• COST EFFICIENT OPEN FRAME DESIGN
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
OPTIONS
Positive logic Remote On/Off, SMD type, Without trim, without On/Off pin
Telecom/Datacom
DESCRIPTION
Industry Control System
Measurement Equipment
Semiconductor Equipment
LED15W single output DC/DC converters provide up to 15 watts of output power in
an industry standard package and footprint. These units are specifically designed to
meet the power needs of low profile. All models feature with 4:1 ultra wide input
voltage of 9-36 VDC and 18-75 VDC, comprehensively protected against
over-current, over-voltage and input under-voltage protection conditions, and
trimmable output voltage.
T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
24V nominal input
48V nominal input
24V input
48V input
9 – 36VDC
18 – 75VDC
50VDC
Output power
15 Watts Input voltage range
Input surge voltage
100mS max
Input reflected ripple
current
Voltage accuracy
Minimum load
Full load and nominal Vin
± 1%
0%
100VDC
Nominal Vin and full load
30mAp-p
Voltage adjustability (Note 6)
Line regulation
±10%
± 0.2%
± 0.2%
Nominal Vin and
Power up
30mS, max.
30mS, max.
9VDC
Start up time
constant resistive load Remote ON/OFF
LL to HL at Full Load
No Load to Full Load
24V input
48V input
24V input
Start-up voltage
18VDC
8VDC
16VDC
Load regulation
20MHz bandwidth
(Measured with a 1μF M/C and a 10μFT/C)
Shutdown voltage
Ripple and noise
See table
48V input
Remote ON/OFF (Note 7)
Positive logic(Option)
±0.02% / ºC, max.
Temperature coefficient
DC-DC ON
DC-DC OFF
Negative logic(Standard) DC-DC ON
DC-DC OFF
Open or 3 V < Vr < 15V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 15V
-0.5mA~1.0mA
Transient response recovery time 25% load step change
3.3V output
Over voltage protection
(Voltage clamped)
250μS
3.7VDC-5.4VDC
5.6VDC-7.0VDC
13.8VDC-17.5VDC
16.8VDC-20.5VDC
5V output
12V output
15V output
Input current of remote control pin
Nominal Vin
Nominal Vin
Remote off state input current
2.5 mA
ENVIRONMENTAL SPECIFICATIONS
Over load protection
% of FL at nominal input
150%,typ.
-40℃ to +85℃ (with derating)
Operating ambient temperature
Short circuit protection
Hiccup, automatics recovery
See table
Storage temperature range
Thermal shock
-55ºC ~ +125ºC
GENERAL SPECIFICATIONS
MIL-STD-810F
Efficiency
Isolation voltage
Input to Output (Basic Insulation)
2250VDC, min. Vibration
MIL-STD-810F
Isolation resistance
Isolation capacitance
109ohms, min.
Relative humidity
5% to 95% RH
1500pF, max.
EMC CHARACTERISTICS
3.3V,5V
12V,15V
350KHz
400KHz
Switching frequency
Approvals and standard
Dimensions
EMI (Note 8)
EN55022
Class A
IEC60950-1, UL60950-1, EN60950-1 Radiated immunity
EN61000-4-3
10 V/m
± 2KV
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
1.10 X 0.94 X 0.34 Inch
Fast transient (Note 9) EN61000-4-4
(27.9 X 23.9 X 8.5 mm)
± 1KV
Weight
10.5g(0.36oz) Surge (Note 9)
EN61000-4-5
BELLCORE TR-NWT-000332
MIL-HDBK-217F
1.322x106hrs
MTBF (Note 1)
Conducted immunity EN61000-4-6
3 Vr.m.s
5.147x105hrs
Page 1 of 3 Issued Date:2008/05/21