LED-17W Series
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ full load, 100V through 277V
<2 Amps max @ 230 Vac, cold start 25ºC
0.20 Amps max at 115 Vac
82% typical at max load
17W
Power Factor:
Inrush Current:
Input Current:
Efficiency:
Maximum Power:
Current Accuracy:
Load Regulation:
THD:
± 1% (when applicable)
± 3%
<_ 20% @ 120 Vac, <_ 35% @ 277 Vac
300 µA Typical
Leakage Current:
Hold Up Time:
Protection:
• Total Power: 17 Watts
Half Cycle
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• Suitable for use signs (UL48)
• High Power Factor
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection with Auto Recovery
• UL Sign Components Manual (S.A.M. Models)
Environmental Specifications
Minimum Starting Temp: -30ºC
Storage Temperature:
Maximum Case Temp.
Humidity:
-40ºC to +85ºC
80°C
5% to 95%
Cooling:
Convection
Class A
Sound Rating:
Vibration Frequency:
MTBF:
Constant Current - Product Specifications
5 to 55 Hz/2g, 30 minutes
Output Current Output Voltage Max. Output
Typical
Efficiency
Model Number
543,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
(mA ±3%)
Range (Vdc)
Power (W)
LED17W-36-C0470
LED17W-24-C0700
LED17W-12-C1400
470
18-36
17
17
17
83%
EMC:
Compliant to CISPR 22 Class B, CISPR 14-1 Class B,
GB4343 1-2003, GB17625.1-2003
700
12-24
82%
1400
6-12
82%
Constant Voltage - Product Specifications
Output Voltage Output Current Max. Output
Typical
Efficiency
Model Number
(Vdc ±3%)
Range (mA)
350-1400
175-700
Power (W)
LED17W-12
LED17W-24
LED17W-36
12
24
36
17
17
17
82%
82%
•
•
118-470
83%
•
Indicates S.A.M.
Class 2:
US/Canada
E332160
Safety and EMC Compliance
Note:
UL/CUL
CSA
C E
UL8750, UL1310
22.2
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
EN61347
FCC, 47CFR Part 15 Class B
Specifications subject to change without notice.
Rev 9-8-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com