KMA220
Dual channel programmable angle sensor
Rev. 1 — 24 May 2012
Product data sheet
1. Product profile
1.1 General description
The KMA220 is a dual channel magnetic angle sensor module. The MagnetoResistive
(MR) sensor bridges, the mixed signal Integrated Circuits (ICs) and the required
capacitors are integrated into a single package. Both integrated channels are working full
independently. The supply voltage has common terminals. Further explanations are
referring to a single channel of the KMA220.
This angular measurement module KMA220 is pre-programmed, pre-calibrated and
therefore, ready to use.
The KMA220 allows user-specific adjustments of angular range, zero angle and clamping
voltages for each channel separately. The settings are stored permanently in a
non-volatile memory.
1.2 Features and benefits
High precision sensor for magnetic
High temperature range up to 160 C
angular measurement
Single package dual channel sensor
module with integrated filters for
improved ElectroMagnetic Compatibility
(EMC)
Dual electric independent sensor
channels with analog ratiometric output
voltages
Automotive qualified in accordance with Overvoltage protection up to 16 V
AEC-Q100 Rev-G
Programmable user adjustments,
Independent programming via
including zero angle and angular range
separated One-Wire Interfaces (OWI)
Fail-safe non-volatile memory with write Each channel includes
protection using lock bit
user-programmable 32-bit identifier
Independent from magnetic field
Magnet-loss and power-loss detection
strength above 35 kA/m
Ready to use without external
Factory calibrated
components
One common supply line