Complete Current Share 10A DC/DC Power Module
ISL8200AMM
Features
• Specifications per DLA VID V62/10608
• Complete Switch Mode Power Supply in One Package
The ISL8200AMMREP is a simple and easy to use high
power, current-sharing DC/DC power module for
Datacom/Telecom/FPGA power hungry applications. All that
is needed is the ISL8200AMMREP, a few passive
• Patented Current Share Architecture Reduces Layout
Sensitivity when Modules are Paralleled
components and one V
setting resistor to have a
OUT
• Programmable Phase Shift (1 to 6 Phase)
• Extremely Low Profile (2.2mm Height)
complete 10A design ready for market.
The ease of use virtually eliminates the design and
manufacturing risks while dramatically improving time to
market.
• Input Voltage Range +3.0V to +20V at 10A, Current Share
up to 60A
• A Single Resistor Sets V
OUT
from +0.6V to +6V
Need more output current? Parallel up to six ISL8200AMMREP
modules to scale up to a 60A solution (see Figure 6 on
page 10).
• Output Overvoltage, Overcurrent and Over-Temperature
Protection and Undervoltage Indication
• Full Mil-Temp Electrical Performance from -55°C to +125°C
The simplicity of the ISL8200AMMREP is in its "Off The Shelf",
unassisted implementation versus a discrete implementation.
Patented current sharing in multi-phase operation greatly
reduces ripple currents, BOM cost and complexity. For
example, parallel 2 for 20A and up to 6 for 60A. The output
voltage can be precisely regulated to as low as 0.6V with ±1%
output voltage regulation over line, load, and temperature
variations.
• Full Traceability Through Assembly and Test byDate/Trace
Code Assignment
• Enhanced Process Change Notification
• Enhanced Obsolescence Management
Applications
• Servers, Telecom and Datacom Applications
• Industrial and Medical Equipment
• Point of Load Regulation
The ISL8200AMMREP’s thermally enhanced, compact QFN
package, operates at full load and over-temperature, without
requiring forced air cooling. It's so thin it can even fit on the
back side of the PCB. Easy access to all pins with few external
components, reduces the PCB design to a component layer
and a simple ground layer.
Related Literature
• AN1738 “ISL8200AMEV1PHZ Evaluation Board User’s
Guide”
• ISL8200AMMREP iSim Model - (Product Information Page)
Complete Functional Schematic
ISL8200AMMREP Package
VOUT RANGE
0.6V TO 6.0V
VIN RANGE
3V TO 20V
VOUT
VIN
PVIN
ISL8200AMMREP
POWER MODULE
RSET
2.2mm
VOUT_SET
VEN
EN
FF
VSEN_REM-
PGND1
ISHARE
10μF
5kΩ
FIGURE 2. THE 2.2mm HEIGHT IS IDEAL FOR THE BACKSIDE
OF PCBS WHEN SPACE AND HEIGHT IS A PREMIUM
FIGURE 1. COMPLETE 10A DESIGN, JUST SELECT R
FOR
SET
THE DESIRED V
OUT
November 27, 2012
FN8287.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2012. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1