ISL8201M
®
Data Sheet
July 16, 2009
FN6657.1
10A, High Efficiency DC/DC Module
Features
The ISL8201M is a 20V, 10A output current, variable output
step-down power supply. Included in the 15mmx15mm
package is a high performance PWM controller switching at
600kHz, power MOSFETs, an inductor, and all the passive
components required for complete DC/DC power solution.
The ISL8201M operates over an input voltage range of 1V to
20V and supports an output voltage range of 0.6V to 5V,
which is set by a single dividing resistor. This high efficiency
power module is capable of delivering 10A (17A peak) output
with up to 95% efficiency, needing no heat sinks or airflow to
meet power specifications. Only bulk input and output
capacitors are needed to finish the design. Utilizing
voltage-mode control, the output voltage can be precisely
regulated to as low as 0.6V with up to ±1% output voltage
regulation. The ISL8201M also features internal
• Complete Switch Mode Power Supply
• Bias Voltage Range from +4.5 to +14.4V
- Wide Input Voltage Range from 1V up to 20V (see
“Input Voltage Considerations” on page 11)
• 10A DC Output Current, 17A Peak Output Current
• Adjustable +0.6V to +5V Output Range
• Up to 95% Efficiency
• Simple Voltage Mode Control
• Fixed 600kHz Switching Frequency
• Fast Transient Response
• Enable Function Option
• Pre-biased Output Start-up Capability
• Internal Soft-Start
compensation, internal soft-start, auto-recovery overcurrent
protection, an enable option, and pre-biased output start-up
capability.
• Overcurrent Protection by Low-Side MOSFET rDS(ON)
Sensing (Non-Latching, Auto-Recovery)
The ISL8201M is packaged in a thermally enhanced, compact
(15mmx15mm) and low profile (3.5mm) over-molded QFN
Package Module suitable for automated assembly by
standard surface mount equipment. The ISL8201M is Pb-free
and RoHS compliant.
• Small Footprint, Low Profile Surface Mount QFN Package
(15mmx15mmx3.5mm)
• Pb-Free (RoHS Compliant)
Applications
Typical Schematic
• Servers
(+5V/+12V)
PVCC
or
• Industrial Equipment
(+6.5V to 14.4V)
CPVCC
• Point of Load Regulation
• Other General Purpose Step-Down DC/DC
• Telecom and Datacom Applications
PVCC
VO
2V)
(+5V / +1
U
T
1.8V
V
COMP/EN
V
PVCC
IN
1I0NA
VIN
(+4.5V to +20V)
C
IN
VIN
VOUT
PHASE
ISL8201M
FB
CIN
COUT
VOUT
Ordering Information
ISL8201M
PART NUMBER
(Note)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
VOUT
ISEN
FB
PGND
PGND
RFB
RFB
COUT
ISL8201MIRZ*
ISL8201M
15 Ld QFN
L15.15x15
4.87k
*Add “-T” suffix for tape and reel. Please refer to TB347 for details
on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.