ISL54221
®
Data Sheet
December 16, 2008
FN6820.0
High-Speed USB 2.0 (480Mbps)
Multiplexer
Features
• High-Speed (480Mbps) and Full-Speed (12Mbps)
Signaling Capability per USB 2.0
The Intersil ISL54221 is a single supply dual 2:1 multiplexer
that can operate from a single 2.7V to 5.5V supply. It contains
two SPDT (Single Pole/Double Throw) switches configured as
a DPDT. The part was designed for switching or routing of
USB High-Speed signals and/or USB Full-speed signals in
portable battery powered products.
• 1.8V Logic Compatible (2.7V to +3.6V supply)
• Enable Pin to Open all Switches
• Power OFF Protection
• D-/D+ Pins Overvoltage Tolerant to 5.5V
The 6.7Ω switches can swing rail to rail and were specifically
designed to pass USB full-speed data signals that range from
0V to 3.3V and USB high-speed data signals that range from
0V to 400mV. They have high bandwidth and low capacitance
to pass USB high-speed data signals with minimal distortion.
• -3dB Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 742MHz
• Low ON Capacitance. . . . . . . . . . . . . . . . . . . . . . . . 7.4pF
• Low ON-Resistance. . . . . . . . . . . . . . . . . . . . . . . . . . 6.7Ω
• Single Supply Operation (V ) . . . . . . . . . . . . 2.7V to 5.5V
DD
The part can be used in Personal Media Players and other
portable battery powered devices that need to route USB
high-speed signals or full-speed signals to different
transceiver sections of the device while connected to a single
USB host (computer).
• Available in µTQFN Package
• Pb-Free (RoHS Compliant)
• Compliant with USB 2.0 Short Circuit and Overvoltage
Requirements Without Additional External Components
The digital logic inputs are 1.8V logic compatible when
operated with a 2.7V to 3.6V supply. The ISL54221 has an
output enable pin to open all the switches. It can be used to
facilitate proper bus disconnect and connection when
switching between the USB sources.
Applications
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
The ISL54221 is available in a tiny 10 Ld 2.1mmx1.6mm
µTQFN package. It operates over a temperature range of
-40 to +85°C.
• Digital Cameras and Camcorders
• USB Switching
Application Block Diagram
µCONTROLLER
V
DD
ISL54221
OE
SEL
LOGIC CIRCUITRY
VBUS
D-
USB
HIGH-SPEED
OR
FULL-SPEED
TRANSCEIVER
HSD1-
HSD1+
D-
USB
HIGH_SPEED
OR
FULL-SPEED
TRANSCEIVER
D+
HSD2-
HSD2+
D+
GND
GND
PORTABLE MEDIA DEVICE
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.