High-Speed USB 2.0 (480Mbps) Multiplexer with
Overvoltage Protection (OVP) and Overvoltage
Indicator Output
ISL54224
Features
• High-Speed (480Mbps) and Full-Speed (12Mbps)
Signaling Capability per USB 2.0
• 1.8V Logic Compatible (2.7V to +3.6V supply)
• OE/ALM Pin to Open all Switches and Indicate
Overvoltage Fault Condition
• Power OFF Protection
The Intersil ISL54224 is a single supply dual 2:1
multiplexer that can operate from a single 2.7V to 5.25V
supply. It contains two SPDT (Single Pole/Double
Throw) switches configured as a DPDT. The part was
designed for switching of USB data signals in portable
battery powered products.
The 6.5Ω switches were specifically designed to pass
USB high speed/full speed data signals. They have high
bandwidth and low capacitance to pass USB high speed
data signals with minimal distortion.
• D-/D+ Pins Overvoltage Protection for +5.25V and
-5V Fault Voltages
• -3dB Frequency . . . . . . . . . . . . . . . . . . 780MHz
• Low ON Capacitance @ 240MHz. . . . . . . . . 3.3pF
• Low ON-Resistance. . . . . . . . . . . . . . . . . . 6.5Ω
The ISL54224 has OVP circuitry on the D-/D+ com pins
that opens the USB in-line switches when the voltage at
these pins exceeds 3.8V (typ) or goes negative by -0.5V
(typ). It isolates fault voltages up to +5.25V or down to
-5V from getting passed to the other-side of the switch,
thereby protecting the USB transceivers.
• Single Supply Operation (V ) . . . . 2.7V to 5.25V
DD
• Available in µTQFN and TDFN Packages
• Pb-Free (RoHS Compliant)
• Compliant with USB 2.0 Short Circuit and
Overvoltage Requirements Without Additional
External Components
The digital logic inputs are 1.8V logic compatible when
operated with a 2.7V to 3.6V supply. The ISL54224 has
an open drain OE/ALM pin that can be driven Low to
open all switches and outputs a Low when the OVP
circuitry is activated. It can be used to facilitate proper
bus disconnect and connection when switching between
the USB sources.
Applications*(see page 16)
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
• Digital Cameras and Camcorders
• USB Switching
The ISL54224 is available in 10 Ld 1.8mmx1.4mm
µTQFN and 10 Ld TDFN packages. It operates over a
temperature range of -40 to +85°C.
Related Literature*(see page 16)
• See AN1571 “ISL54224IRTZEVAL1Z Evaluation
Board User's Manual”
Typical Application
USB 2.0 HS Eye Pattern With
Switches in the Signal Path
3.3V
3.3V
500Ω
100kΩ
VDD
OE/ALM
LOGIC
CONTROL
SEL
µP
VBUS
D-
HSD1-
USB
D-
TRANSCEIVER
HSD1+
OVP
HSD2-
D+
D+
USB
TRANSCEIVER
HSD2+
ISL54224
GND
GND
TIME SCALE (0.2ns/DIV)
June 7, 2010
FN6969.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.