DATASHEET
ISL54225
FN7627
Rev 0.00
July 2, 2010
High-Speed USB 2.0 (480Mbps) Multiplexer with Overvoltage Protection (OVP)
The ISL54225 is a single supply dual 2:1 multiplexer
that can operate from a single 2.7V to 5.25V supply.
Features
• High-Speed (480Mbps) and Full-Speed (12Mbps)
Signaling Capability per USB 2.0
It contains two SPDT (Single Pole/Double Throw)
switches configured as a DPDT. The part was designed
for switching or routing of USB High-Speed signals
and/or USB Full-speed signals in portable battery
powered products.
• 1.8V Logic Compatible (2.7V to +3.6V Supply)
• Enable Pin to Open all Switches
• Low Power Mode
The 6.5switches were specifically designed to pass
USB high speed/full speed data signals. They have
high bandwidth and low capacitance to pass USB high
speed data signals with minimal DISTORTION.
• Power OFF Protection
• D-/D+ Pins Overvoltage Protection for +5.25V and
-5V Fault Voltages
• -3dB Frequency 780MHz
The ISL54225 has OVP circuitry on the D-/D+ COM
pins that opens the USB in-line switches when the
voltage at these pins exceeds 3.8V (typ) or goes
negative by -0.5V (typ). It isolates fault voltages up to
+5.25V or down to
• Low ON Capacitance @ 240MHz 3.3pF
• Low ON-Resistance 6.5
• Single Supply Operation (V ) 2.7V to 5.25V
DD
• Available in µTQFN and TDFN Packages
• Pb-Free (RoHS Compliant)
-5V from getting passed to the other-side of the
switch, thereby protecting the USB transceivers.
• Compliant with USB 2.0 Short Circuit and
Overvoltage Requirements Without Additional
External Components
The digital logic inputs are 1.8V logic compatible when
operated with a 2.7V to 3.6V supply. The ISL54225
has an output enable pin to open all the switches. It
can be used to facilitate proper bus disconnect and
connection when switching between the USB sources.
Applications*(see page 16)
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDAs
The ISL54225 is available in 10 Ld 1.8mmx1.4mm
µTQFN and 10 Ld TDFN packages. It operates over a
temperature range of -40°C to +85°C.
• Digital Cameras and Camcorders
• USB Switching
Typical Application
USB 2.0 HS Eye Pattern With
Switches in the Signal Path
3.3V
500Ω
VDD
OE
LOGIC
µP
SEL
CONTROL
VBUS
D-
HSD1-
USB
TRANSCEIVER
D-
HSD1+
OVP
HSD2-
D+
D+
USB
TRANSCEIVER
HSD2+
ISL54225
GND
GND
TIME SCALE (0.2ns/DIV)
FN7627 Rev 0.00
July 2, 2010
Page 1 of 18