High-Speed USB 2.0 (480Mbps) Multiplexer
ISL54222A
Features
• High-Speed (480Mbps) and Full-Speed (12Mbps)
Signaling Capability per USB 2.0
The Intersil ISL54222A is a single supply dual 2:1
multiplexer that can operate from a single 1.8V to 3.3V
supply. It contains two SPDT (Single Pole/Double
Throw) switches configured as a DPDT. The part was
designed for switching or routing of USB High-Speed
signals and/or USB Full-speed signals in portable
battery powered products.
• 1.8V Logic Compatible
• Low Power All Off State
• Power OFF Protection
• D-/D+ Pins Overvoltage Tolerant to 5.5V
• -3dB Frequency . . . . . . . . . . . . . . . . . . 780MHz
• Low ON Capacitance @ 240MHz. . . . . . . . . 4.2pF
The 4.4Ω switches can swing rail-to-rail and were
specifically designed to pass USB full speed data signals
that range from 0V to 3.3V and USB high-speed data
signals that range from 0V to 400mV with a single
supply as low as 1.8V. They have high bandwidth and
low capacitance to pass USB high speed data signals
with minimal distortion.
• Low ON-Resistance @ V
• Low ON-Resistance @ V
= 3V . . . . . . . . 4.4Ω
= 1.8V . . . . . . . 5.7Ω
DD
DD
• Single Supply Operation (V ) . . . . . 1.8V to 3.3V
DD
• Available in µTQFN, TDFN, MSOP Packages
• Pb-Free (RoHS Compliant)
The digital logic inputs are 1.8V logic compatible when
operated with a 1.8V to 3.3V supply. The ISL54222A
has an output enable pin to open all the switches and
put the part in a low power state.
• Compliant with USB 2.0 Short Circuit and
Overvoltage Requirements Without Additional
External Components
The ISL54222A is available in 10 Ld 1.8mmx1.4mm
µTQFN, 10 Ld 2.1mmx1.6mm µTQFN, 10 Ld TDFN and
10 Ld MSOP packages. It operates over a temperature
range of -40° to +85°C.
• HBM ESD Performance I/O to GND . . . . . . >12kV
Applications*(see page 15)
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Digital Cameras and Camcorders
• USB Switching
• Application Note AN1450 “ISL54222AIRUEVAL1Z
Evaluation Board User’s Manual”
Application Block Diagram
USB 2.0 HS Eye Pattern With
Switches In The Signal Path
µCONTROLLER
V
DD
ISL54222A
OE
SEL
LOGIC
USB
HIGH-SPEED
OR
FULL-SPEED
VBUS
D-
HSD1-
D-
HSD1+
TRANSCEIVER
HSD2-
USB
D+
D+
HIGH_SPEED
OR
FULL-SPEED
TRANSCEIVER
HSD2+
GND
GND
TIME SCALE (0.2ns/DIV)
PORTABLE MEDIA DEVICE
February 4, 2010
FN6902.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009, 2010. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.