IDT72V01
IDT72V02
IDT72V03
IDT72V04
3.3 VOLT CMOS
ASYNCHRONOUS FIFO
512 x 9, 1024 x 9, 2048 x 9, 4096 x 9
Integrated Device Technology, Inc.
7202/7203/7204. These devices load and empty data on a
first-in/first-out basis. They use Full and Empty flags to
prevent data overflow and underflow and expansion logic to
allow for unlimited expansion capability in both word size and
depth.
FEATURES:
• 3.3V family uses 70% less power than the 5 Volt 7201/
02/03/04 family
• 512 x 9 organization (72V01)
• 1024 x 9 organization (72V02)
The reads and writes are internally sequential through the
use of ring pointers, with no address information required to
loadandunloaddata. Dataistoggledinandoutofthedevices
throughtheuseoftheWrite(W)andRead(R)pins. Thedevices
have a maximum data access time as fast as 25 ns.
The devices utilize a 9-bit wide data array to allow for
control and parity bits at the user’s option. This feature is
especially useful in data communications applications where
it is necessary to use a parity bit for transmission/reception
errorchecking. TheyalsofeatureaRetransmit(RT)capability
that allows for reset of the read pointer to its initial position
when RT is pulsed low to allow for retransmission from the
beginning of data. A Half-Full Flag is available in the single
device mode and width expansion modes.
• 2048 x 9 organization (72V03)
• 4096 X 9 organization (72V04)
• Functionally compatible with 720x family
• 25 ns access time
• Asynchronous and simultaneous read and write
• Fully expandable by both word depth and/or bit width
• Status Flags: Empty, Half-Full, Full
• Auto-retransmit capability
• Available in 32-pin PLCC and 28-pin SOIC Package (to
be determined)
• Industrial temperature range (-40oC to +85oC) is avail-
able, tested to military electrical specifications
DESCRIPTION:
The IDT72V01/72V02/72V03/72V04 is fabricated using
IDT’shigh-speedCMOStechnology. Ithasbeendesignedfor
those applications requiring asynchronous and simultaneous
read/writes in multiprocessing and rate buffer applications.
The IDT72V01/72V02/72V03/72V04 are dual-port FIFO
memories that operate at a power supply voltage (Vcc)
between 3.0V and 3.6V. Their architecture, functional opera-
tionandpinassignmentsareidenticaltothoseoftheIDT7201/
FUNCTIONAL BLOCK DIAGRAM
DATA INPUTS
(D0–D8)
WRITE
W
CONTROL
RAM
WRITE
POINTER
ARRAY
512x 9
READ
POINTER
1024 x 9
2048 x 9
4096 x 9
THREE-
STATE
BUFFERS
RS
DATA OUTPUTS
(Q0–Q8)
READ
R
RESET
LOGIC
CONTROL
FLAG
LOGIC
EF
FF
FL/RT
EXPANSION
LOGIC
XI
XO/HF
2679 drw 01
CEMOS is a trademark of Integrated Device Technology, Inc.
FAST is a trademark of National Semiconductor Co.
COMMERCIAL TEMPERATURE RANGE
DECEMBER 1996
1996 Integrated Device Technology, Inc.
DSC-3033/6
For latest information contact IDT's web site at www.idt.com or fax-on-demand at 408-492-8391.
5.08
1