HT73Lxx
6.6V, 250mA TinyPowerTM High PSRR LDO
with Protections
Features
General Description
• 2.3V to 6.6V operating input voltage
• Up to 250mA output current capability
The HT73Lxx are a series of low dropout voltage
regulators with an input voltage range from 2.3V to
6.6V. They are available in a range of fixed output
• Fixed output voltage range: 0.9V, 1.05V, 1.2V,
1.5V, 1.8V, 2.5V, 2.7V, 3.0V, 3.3V and 3.6V with
±2% accuracy
voltages from 0.9V to 3.6V. When the CE pin input is
low, a fast discharge path pulls the output voltage low
via an internal pull-down resistor. An internal over-
current protection circuit prevents the devices from
damage even if their output was shorted to ground. An
over-temperature protection circuit ensures the device
junction temperature will not exceed a temperature of
150ºC.
• Ultra low input consumption current: 1.35μA
(typical)
• Stable with 1µF ceramic output capacitor
• Fast output discharge to ground when shutdown
• Soft-start function when powered on
• High PSRR: 75dB at 1kHz
Due to the device’s outstanding PSRR and low output
noise performance features, they are suitable for
use in powering RF applications such as sub-1GHz
transceivers. Their ultra-small 4-pin DFN package
type with their 0.4mm thickness makes the devices
also suitable for space limited applications such as
financial/credit cards or smart wearable products.
• Low output noise: 50µVRMS from 10Hz to 100kHz
• Over current and over temperature protection features
• Enable/disable function
• Package types: 4-pin DFN, 5-pin SOT23 and
3-pin SOT89
Applications
• IoT devices
• Smart/Health wearable devices
Selection Table
Part No.
HT73L09
HT73L10
HT73L12
HT73L15
HT73L18
HT73L25
HT73L27
HT73L30
HT73L33
HT73L36
Output Voltage
0.9V
Package Type
Marking
1.05V
1.2V
1.5V
4DFN
SOT23-5
SOT89
xx for 4DFN type
3Lxx for SOT23-5 type
HT73Lxx for SOT89 type
1.8V
2.5V
2.7V
3.0V
3.3V
3.6V
Note: ″xx″ stands for output voltages
Rev. 1.30
1
June 03, 2021