HT74153
6.0V / 2.0A / 1.2MHz Synchronous
Step-Down Converter
Features
General Description
• Wide input range of VIN from 2.5V to 6.0V
• Output voltage range from 0.6V to VDD
• Internal low on-resistance switches
The HT74153 is a high efficiency synchronous
step-down converter capable of delivering 2A
output current. It can operate over a wide input voltage
range from 2.5V to 6.0V and integrates 100mΩ low
on-resistance main and rectified switches to
minimize the conduction losses. Up to 1.2MHz
switching frequency in PWM allows to use the small
surface mount inductors and capacitors in applications.
♦
High-Side RDS(ON) 100mΩ
♦
Low-Side RDS(ON) 100mΩ
• 100% duty cycle operation
• Switching frequency: 1.2MHz
The automatically PWM/PFM mode switching is
useful to drive up to 2A load current and also
decrease its standby current in no load condition. The
Hysteretic PFM mode extends the battery life by
reducing the quiescent current during the system
standby. In the shutdown mode, the device turns off
and consumes only 0.1μA input current.
• PFM mode operation when no load/light load
conditions
• Output voltage power good indicator when
VOUT=0.95×VOUT(TARGET) (8SOP-EP)
• Low IC surface temperature in short circuit
protection
• Protection features
The HT74153 also provides 100% duty cycle
operation. When the input supply voltage decreases
toward the targeted output voltage, the High-Side
MOSFET will always turn on and the output voltage
tracks the input voltage, which can extend the battery
life.
♦
VDD under voltage lock-out
♦
Cycle-by-Cycle over current protection
♦
Thermal shutdown protection
♦
Output short-circuit protection
♦
Output over-voltage protection
• Package types: 8-pin SOP-EP and 5-pin SOT23
Applications
• Single Li-Battery applications and small motor
driver applications
• Rechargeable AA batteries
• Laser demarcation device
• Portable toy
• 5V USB/Adaptor power source
• 3.3V DC source
Rev. 1.10
1
August 26, 2023