HT7463C/HT7463D
60V/600mA, 1.25MHz/550kHz
Asynchronous Step Down Converter
Features
General Description
• Wide Input Voltage Range 4.5V to 60V
• 60V / 0.9Ω Internal Power MOSFET
• 600mA Peak Output Current
• Up to 90% Efficiency
The HT7463C/D is a current mode buck converter.
With a wide input range from 4.5V to 60V,
the HT7463C/D is suitable for a wide range of
applications such as power conditioning from
unregulated sources. Having a low internal switch
typical RDSON value of 0.9Ω, the device has a good
operating typical efficiency value of 85% and the
added advantage of reduced junction temperature.
The operating frequency is fixed at 1250/550kHz for
the HT7463C/HT7463D respectively. The HT7463C
allows the use of small external components while
still being able to have low output voltage ripple.
A soft-start function can be implemented using the
enable pin and by connecting an external RC circuit
allowing the user to tailor the soft-start time to a
specific application.
• 1.25MHz (HT7463C) and 550kHz (HT7463D)
Fixed Operating Frequency
• Ultra Low Shutdown Current < 1
• Output Short Circuit Protection
• Thermal Shutdown Protection
• Package Type: 6-pin SOT23
µA
Applications
• Power Meters
• Distribution Power Systems
• Battery Chargers
• Pre-Regulator for Linear Regulators
Application Circuit
CB
0.1µF
L1 *3
VOUT=12V *2
D1
C3
0.1µF
C4
HT7463C/D
22µF *1
1
2
6
CB
SW
VIN
5
4
VIN
GND
3
FB
EN
On/Off
Control
C1
0.1µF
C2
100µF
R1
84kΩ / ±1%
R2
6kΩ / ±1%
Note: *1. C4=330μF is recommended to achieve 1‰ output ripple requirement
2. Set R1=84kΩ and R2=6kΩ for VOUT=12V application
*
3. Typically recommended that L1=22µH for HT7463C and L1=47µH for HT7463D. Electromagnetic interfer-
*
ence situation suggest L1=100µH or more
Rev. 1.00
1
September 05, 2022