5秒后页面跳转
HSP9501JC-2596 PDF预览

HSP9501JC-2596

更新时间: 2024-11-15 20:24:23
品牌 Logo 应用领域
瑞萨 - RENESAS 时钟外围集成电路
页数 文件大小 规格书
8页 50K
描述
10-BIT, DSP-PIPELINE REGISTER, PQCC44

HSP9501JC-2596 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:LCC包装说明:PLASTIC, LCC-44
针数:44Reach Compliance Code:not_compliant
风险等级:5.76边界扫描:NO
最大时钟频率:25 MHz外部数据总线宽度:10
JESD-30 代码:S-PQCC-J44JESD-609代码:e0
低功率模式:YES端子数量:44
最高工作温度:70 °C最低工作温度:
输出数据总线宽度:10封装主体材料:PLASTIC/EPOXY
封装形状:SQUARE封装形式:CHIP CARRIER
认证状态:Not Qualified最大压摆率:125 mA
最大供电电压:5.25 V最小供电电压:4.75 V
标称供电电压:5 V表面贴装:YES
技术:CMOS温度等级:COMMERCIAL
端子面层:Tin/Lead (Sn/Pb)端子形式:J BEND
端子位置:QUADuPs/uCs/外围集成电路类型:DSP PERIPHERAL, PIPELINE REGISTER
Base Number Matches:1

HSP9501JC-2596 数据手册

 浏览型号HSP9501JC-2596的Datasheet PDF文件第2页浏览型号HSP9501JC-2596的Datasheet PDF文件第3页浏览型号HSP9501JC-2596的Datasheet PDF文件第4页浏览型号HSP9501JC-2596的Datasheet PDF文件第5页浏览型号HSP9501JC-2596的Datasheet PDF文件第6页浏览型号HSP9501JC-2596的Datasheet PDF文件第7页 
HSP9501  
TM  
Data Sheet  
January 1999  
File Number 2786.4  
Programmable Data Buffer  
Features  
The HSP9501 is a 10-Bit wide programmable data buffer  
designed for use in high speed digital systems. Two different  
modes of operation can be selected through the use of the  
MODSEL input. In the delay mode, a programmable data  
pipeline is created which can provide 2 to 1281 clock cycles  
of delay between the input and output data. In the data  
recirculate mode, the output data path is internally routed  
back to the input to provide a programmable circular buffer.  
• DC to 32MHz Operating Frequency  
• Programmable Buffer Length from 2 to 1281 Words  
• Supports Data Words to 10 Bits  
• Clock Select Logic for Positive or Negative Edge  
System Clocks  
• Data Recirculate or Delay Modes of Operation  
• Expandable Data Word Width or Buffer Length  
• Three-State Outputs  
The length of the buffer or amount of delay is programmed  
through the use of the 11-bit Length Control Input Port (LC0-  
10) and the Length Control Enable (LCEN). An 11-bit value  
is applied to the LC0-10 inputs, LCEN is asserted, and the  
next selected clock edge loads the new count value into the  
Length Control Register. The delay path of the HSP9501  
consists of two registers with a programmable delay RAM  
between them, therefore, the value programmed into the  
Length Control Register is the desired length - 2. The range  
of values which can be programmed into the Length Control  
Register are from 0 to 1279, which in turn results in an  
overall range of programmable delays from 2 to 1281.  
• TTL Compatible Inputs/Outputs  
• Low Power CMOS  
Applications  
• Sample Rate Conversion  
• Data Time Compression/Expansion  
• Software Controlled Data Alignment  
• Programmable Serial Data Shifting  
• Audio/Speech Data Processing Video/Image Processing  
Clock select logic is provided to allow the use of a positive or  
negative edge system clock as the CLK input to the  
HSP9501. The active edge of the CLK input is controlled  
through the use of the CLKSEL input. All synchronous timing  
(i.e., data setup, hold, and output delays) are relative to the  
clock edge selected by CLKSEL. An additional clock enable  
input (CLKEN) provides a means of disabling the internal  
clock and holding the existing contents temporarily. All  
outputs of the HSP9501 are three-state outputs to allow  
direct interfacing to system or multi-use busses.  
Video/Image Processing  
• 1-H Delay Line of 910 NTSC, 1135 PAL or 1280 Samples:  
- High Resolution Monitor Delay Line  
- Comb Filter Designs  
- Progressive Scanning Display  
- TV Standards Conversion  
- Image Processing  
The HSP9501 is recommended for digital video processing  
or any applications which require a programmable delay or  
circular data buffer.  
Ordering Information  
TEMP.  
PKG.  
NO.  
o
PART NUMBER RANGE ( C)  
PACKAGE  
44 Ld PLCC  
HSP9501JC-25  
HSP9501JC-32  
HSP9501JC-2596  
0 to 70  
0 to 70  
0 to 70  
N44.65  
N44.65  
N44.65  
44 Ld PLCC  
44 Ld PLCC  
Tape and Reel  
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.  
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Corporation. | Copyright © Intersil Corporation 2000  
3-1  

与HSP9501JC-2596相关器件

型号 品牌 获取价格 描述 数据表
HSP9501JC-30 RENESAS

获取价格

10-BIT, DSP-PIPELINE REGISTER, PQCC44
HSP9501JC-32 INTERSIL

获取价格

Programmable Data Buffer
HSP9501JC-32 RENESAS

获取价格

Programmable Data Buffer; PLCC44; Temp Range: 0° to 70°
HSP9501JC-3296 RENESAS

获取价格

10-BIT, DSP-PIPELINE REGISTER, PQCC44
HSP9520 INTERSIL

获取价格

Multilevel Pipeline Registers
HSP9520CP INTERSIL

获取价格

Multilevel Pipeline Registers
HSP9520CS INTERSIL

获取价格

Multilevel Pipeline Registers
HSP9520SC RENESAS

获取价格

8-BIT, DSP-PIPELINE REGISTER, PDSO24
HSP9521 INTERSIL

获取价格

Multilevel Pipeline Registers
HSP9521CP INTERSIL

获取价格

Multilevel Pipeline Registers