HJ RELAYS
ACCESSORIES
(Sockets and DIN rail
terminal sockets)
TYPES
1. Sockets (HC sockets)
Standard packing
Type
No. of poles
Product name
Part No.
Carton
Case
2-pole
HC2-socket (for HJ relay)
HC2-SS-K-H105
HC4-SS-K-H105
HC2-PS-K-H105
HC4-PS-K-H105
Plug-in socket
PC board socket
2/4-pole (common)
2-pole
HC4-socket (for HJ relay)
10 pcs.
100 pcs.
HC2-PC board socket (for HJ relay)
HC4-PC board socket (for HJ relay)
2/4-pole (common)
Notes: 1. Use the hold-down clip that is shipped with the terminal socket or socket.
2. DIN rail terminal sockets conform to UL/C-UL and TÜV, as standard. Sockets conform to UL and CSA, as standard.
3. In order to prevent breakage and disfiguring, the screw tightening torque for the terminal socket should be within the range of 0.49 to 0.69 N·m (5 to 7 kgf·cm).
4. When attaching directly to a chassis, please use an M4 × 10 metric coarse screw thread, a spring washer, and a hexagonal nut.
5. For S1DX/S1DXM timer, use the leaf holding clip (Part No. ADX18012).
2.Terminal sockets (HJ terminal sockets)
Standard packing
Applicable HJ relay (Plug-in type)
Type
No. of poles
Product name
Part No.
HJ2-SFD
Carton
Case
2 Form C
4 Form C
HJ2 terminal socket
HJ2 terminal socket (Finger protect type) HJ2-SFD-S
HJ4 terminal socket HJ4-SFD
HJ4 terminal socket (Finger protect type) HJ4-SFD-S
●
●
2-pole
For
DIN rail
10 pcs.
100 pcs.
▲*1
▲*1
●
●
2/4-pole (common)
*1 When using 2/4-pole common type, please use within a range that dose not exceed the max. continuous current (5A)
3.Terminal sockets (HC terminal sockets)
Standard packing
Applicable HJ relay (Plug-in type)
Type
No. of poles
Product name
Part No.
Carton
20 pcs.
Case
2 Form C
4 Form C
2-pole
HC2-slim type DIN terminal socket
HC2-SFD-S
HC3-SFD-K
HC4-TSF-K
100 pcs.
●
●
●
For
DIN rail
2/3-pole (common) HC3-DIN terminal socket
1/2/4-pole (common) HC vertical terminal socket
5 pcs.
50 pcs.
●
Note: 1. For rating of HC terminal sockets, please refer to page 52.
RATING
Specifications (Sockets and terminal sockets)
Item
Performance
HJ2
terminalsocket
terminal socket (Finger protect
type)
HJ4
terminalsocket
terminal socket (Finger protect
type)
For HC2/HJ
Plug in
terminal socket
For HC2/HJ
PC board
socket
For HC4/HJ
Plug in
terminal socket
For HC4/HJ
PC board
socket
HJ2
HJ4
Type
Contact arrangement
2 Form C (2-pole)
4 Form C (2/4-pole common)
Max. continuous current
(Ambient temperature: -40/-50
to +70°C -40/-58 to +158°F)
7A
7A 7A
7A
5A
5A 5A
5A
Between open
contacts
Breakdown
Between contact
voltage
2, 000 Vrms for 1 min. (Detection current: 10mA)
sets
(Initial)
Between contact
and coil
Initial insulation resistance
100 MΩ between each terminal (500V DC)
Note: When using 2-pole of HJ relay (7A rating) on a 4 Form C socket and terminal socket that is 2/4-pole common, please use within a range that does not exceed the max.
continuous current (5A).
ASCTB260E 201408-T
–1–