Document 734
For Linear Technology LT3751
Flyback Transformer Capacitor Charger Controller
•ꢀFlybacktransformerfortheLinearTechnologyLT3751Capacitor
Charger Controller
•ꢀ120 – 377 V input; up to 500 V output
•ꢀ3000 Vrms isolation from primary to secondary windings
Core material Ferrite
Terminations RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 23.8 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tray packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 24 per tray
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR max
Inductance
at0A1
±±0ꢀ(µH)
Inductance
at Ipk2
min (µH)
Leakage
inductance4
max (µH)
Volt-time
product
typ (V µsec)
(Ohms)3
Part
number
Turns ratio5
pri:sec
Ipk2
(A)
pri
sec
HA4060-AL
300
270
0.422
1.58
2.7
1:3
2.0
600
1. Inductance is measured at 100 kHz, 0.1 Vrms.
2. Peak primary current drawn at minimum input voltage.
3. DCR is with the windings connected in parallel.
4. Leakage inductance is for both windings of the primary with the second-
ary windings shorted.
5. Turns ratios are with the primary and secondary windings connected in
parallel.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
1
2
5
6
Dot indicates pin 1
0.108
1.10
28,2
1
2,75
12
1
12
Pri
Sec
0.039
1,00
7
8
11
12
Recommended
Land Pattern
1.053
26,75
0.148
3,75
max
Primary windings and second-
ary windings to be connected in
parallel on PC board.
0.079
2,00
0.148
3,75
Parts manufactured prior
to December 2011 may
be marked differently.
0.551
14,0
max
0.004 / 0,10
1.024
26,0
1.350
34,29
max
inches
mm
Dimensions are in
Document 734 Revised 12/16/11
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.