HA4201
®
Data Sheet
March 8, 2007
FN3680.6
480MHz, 1x1 Video Crosspoint
Switch with Tally Output
Features
• Low Power Dissipation. . . . . . . . . . . . . . . . . . . . . 105mW
• Symmetrical Slew Rates . . . . . . . . . . . . . . . . . . 1700V/μs
• 0.1dB Gain Flatness. . . . . . . . . . . . . . . . . . . . . . . 250MHz
• Off Isolation (100MHz) . . . . . . . . . . . . . . . . . . . . . . . 85dB
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01%
• Differential Phase. . . . . . . . . . . . . . . . . . . . . 0.01 Degrees
• High ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . >1800V
• TTL Compatible Enable Input
The HA4201 is a very wide bandwidth 1x1 crosspoint switch
ideal for professional video switching, HDTV, computer
monitor routing, and other high performance applications.
The circuit features very low power dissipation (105mW
Enabled, 1mW Disabled), excellent differential gain and
phase, and very high off isolation. When disabled, the output
is switched to a high impedance state, making the HA4201
ideal for routing matrix equipment.
The HA4201 requires no external current source, and
features fast switching and symmetric slew rates. The tally
• Open Collector Tally Output
output is an open collector PNP transistor to V , and is
CC
activated whenever EN = 1 to provide an indication of
crosspoint selection.
• Improved Replacement for GX4201
• Pb-Free Plus Anneal Available (RoHS Compliant)
For applications which don’t require a TALLY output, please
refer to the HA4600 data sheet.
Applications
• Professional Video Switching and Routing
• Video Multiplexers
Pinout
HA4201
(8 LD SOIC)
TOP VIEW
• HDTV
• Computer Graphics
• RF Switching and Routing
• PCM Data Routing
EN
V-
1
2
3
4
8
7
6
5
GND
IN
V+
NC
Ordering Information
OUT
TALLY
TEMP.
PART
NUMBER
PART
MARKING
RANGE
(°C)
PKG.
PACKAGE DWG. #
HA4201CB96 4201C B
0 to +70 8 Ld SOIC
Tape and
M8.15
Truth Table
Reel
EN
OUT
High Z
Active
TALLY
HA4201CBZ96 4201C BZ
(Note)
0 to +70 8 Ld SOIC
(Pb-free)
M8.15
0
Off
On
1
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.