FEATURES
• 10 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 2.5A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 87%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY (300KHz)
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
OPTIONS
Negative & Positive logic Remote On/Off
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FDC10 and FDC10-W series offer 10 watts of output power from a
2.0 x 1.0 x 0.4 inch package. FDC10 series have 2:1 wide input voltage of
9-18, 18-36 and 36-75VDC. FDC10-W series have 4:1 ultra wide input
voltage of 9-36 and 18-75VDC.
T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted.
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
FDC10
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
9 – 36VDC
18 – 75VDC
Pi type
Output power
10 Watts, max.
Voltage accuracy
Minimum load
Line regulation
Full load and nominal Vin
± 1%
0%
Input voltage range
FDC10-W 24V nominal input
48V nominal input
LL to HL at Full Load
No Load to Full Load
± 0.2%
± 0.5%
± 1%
Input filter
Single
Dual
Load regulation
12V input
24V input
48V input
36VDC
50VDC
100VDC
30mAp-p
Input surge voltage
100mS max
Cross regulation(Dual) Asymmetrical load 25% / 100% FL
± 5%
Single
Dual
Ripple and noise
20MHz bandwidth
See table
Input reflected ripple current
Nominal Vin and full load
Nominal Vin and
constant resistive load
Remote ON/OFF (Option) (Note 6)
±0.02% / ºC, max.
Temperature coefficient
Start up time
Power up
20mS, typ.
Transient response recovery time 25% load step change
250μS
3.3V output
3.9VDC
6.2VDC
15VDC
18VDC
(Positive logic)
(Negative logic)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
-0.5mA ~ +1mA
Over voltage protection 5V output
Zener diode clamp
12V output
15V output
% of FL at nominal input
Over load protection
150%, max.
Input current of remote control pin Nominal Vin
Remote off state input current Nominal Vin
Short circuit protection
Hiccup, automatics recovery
20mA
GENERAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
temperature
(Reference derating curve)
Maximum case temperature
Storage temperature range
Standard
M1 (Note 7)
M2 (W series) -40ºC ~ +85ºC (with derating)
-25ºC ~ +85ºC (with derating)
-40ºC ~ +85ºC (non-derating)
Efficiency
See table
Isolation voltage
Isolation resistance
Isolation capacitance
Switching frequency
Approvals and standard
Case material
1600VDC, min.
9
10 ohms, min.
+100ºC
300pF, max.
300KHz, typ.
-55ºC ~ +105ºC
Nature convection
Nature convection with heat-sink 10ºC/watt
12ºC/watt
Thermal impedance (Note 8)
IEC60950-1, UL60950-1, EN60950-1
Nickel-coated copper
Thermal shock
Vibration
MIL-STD-810F
MIL-STD-810F
Base material
Non-conductive black plastic
Epoxy (UL94-V0)
Relative humidity
5% to 95% RH
Potting material
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
EMC CHARACTERISTICS
Dimensions
Weight
EMI (Note 9)
EN55022
Class A
27g (0.95oz)
BELLCORE TR-NWT-000332 1.976 x 106 hrs
± 8KV
± 6KV
Air
Contact
MTBF (Note 1)
ESD
EN61000-4-2
EN61000-4-3
Perf. Criteria B
MIL-HDBK-217F
1.416 x 106 hrs
Radiated immunity
10 V/m Perf. Criteria A
± 2KV
± 1KV
Fast transient (Note 10) EN61000-4-4
Perf. Criteria B
Perf. Criteria B
Surge (Note 10)
EN61000-4-5
EN61000-4-6
Conducted immunity
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date:2008/05/21