500 mA USB Compatible
Single Cell Li-Lon Linear
Charger with “Power Back”
Capability
FAN54120
The FAN5120 is a small, low−cost, fully integrated single−cell
charger which supports dead battery revival, pre−charge, fast charge,
and float charge states.
www.onsemi.com
Fast charging current (I ) is set with an external resistor.
FAST
Pre−charge (I ) and charge complete (I
) currents are
PRE
CHGEND
factory set at I /5.2 and I /10, respectively.
FAST FAST
The FAN54120 is specifically designed for ease−of−use as
a stand−alone charger. It requires no user interaction or active
supervision.
DFN6 2x2, 0.65P
CASE 506DQ
WLCSP6 1.36x0.76
CASE 567XQ
An open−drain STAT pin provides charge and/or fault status
indication.
“Power Back” capability to source accessories from the battery.
The FAN54120 is available in a 2x2 DFN package or
a 1.36x0.76 mm WLCSP.
MARKING DIAGRAM
1
XX M
Features
• Fully Integrated Charger for Single Cell Li−Ion or Li−Polymer
Batteries
• Factory Configured Charge Voltage (Ordering Option)
XX= 20, Specific Device Number
M = One Digit Date Code
= Pb Free
•
0.5% Charge Voltage Accuracy
• User Determined Fast Charge Current Via External Resistor
• +4% Charge Current Accuracy
• 28 V Maximum Input Voltage, 6 V Operating
• Ultra−low Battery Discharge Current (<120 nA)
• True Reverse Current Blocking
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
• Adaptive Thermal Regulation
• Supports JEITA Safe−to−Charge Operation with an External NTC
• “Power Back Functionality to Power Accessories from the Battery
FAN54120
VIN
VIN
BAT
+
C
IN
STAT
NTC
Application
C
OUT
LOAD
NTC
GND ISET
• IoT Devices
• E−Cigs / Vapes
R
SET
• Personal Mobile Devices (Games, Camera, etc.)
• Toys
Figure 1. Typical Application
• Point−of−Sale Instruments
© Semiconductor Components Industries, LLC, 2019
1
Publication Order Number:
FAN54120/D
November, 2019 − Rev. 0