August 2009
FAN5602 — Universal (Step-Up/Step-Down) Charge
Pump Regulated DC/DC Converter
Features
Description
■
Low-Noise, Constant-Frequency Operation at Heavy Load
High-Efficiency, Pulse-Skip (PFM) Operation at Light Load
The FAN5602 is a universal switched capacitor DC/DC
converter capable of step-up or step-down operation.
Due to its unique adaptive fractional switching topology,
the device achieves high efficiency over a wider input/
output voltage range than any of its predecessors. The
FAN5602 utilizes resistance-modulated loop control,
which produces lower switching noise than other topolo-
gies. Depending upon actual load conditions, the device
automatically switches between constant-frequency and
pulse-skipping modes of operation to extend battery life.
■
■Switch Configurations (1:3, 1:2, 2:3, 1:1, 3:2, 2:1, 3:1)
■92% Peak Efficiency
■Input Voltage Range: 2.7V to 5.5V
■Output Current: 4.5V, 100mA at VIN = 3.6V
■±3% Output Voltage Accuracy
■ICC < 1µA in Shutdown Mode
■1MHz Operating Frequency
■Shutdown Isolates Output from Input
■Soft-Start Limits Inrush Current at Startup
■Short-Circuit and Over-Temperature Protection
■Minimum External Component Count
■No Inductors
The FAN5602 produces a fixed regulated output within
the range of 2.7V to 5.5V from any type of voltage
source. High efficiency is achieved under various input/
output voltage conditions because an internal logic circuit
automatically reconfigures the system to the best possi-
ble topology. Only two 1µF bucket capacitors and one
10µF output capacitor are needed. During power on,
soft-start circuitry prevents excessive current drawn from
the supply. The device is protected against short-circuit
and over-temperature conditions.
Applications
■Cell Phones
■Handheld Computers
■Portable RF Communication Equipment
■Core Supply to Low-Power Processors
■Low-Voltage DC Bus
The FAN5602 is available with 4.5V and 5.0V output volt-
ages in a 3x3mm 8-lead MLP package.
■DSP Supplies
Ordering Information
Part Number
FAM6502MP45X
FAN5602MP5X
Package
Eco Status
Green
Output Voltage, NVOM
3x3mm 8-Lead MLP
3x3mm 8-Lead MLP
4.5V
5.0V
Green
Note:
1. Reference MLP08D Option B ONLY.
2. For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Application Diagram
Input 2.7V to 5.5V
C2+
V
IN
ENABLE
1
2
8
6
C
IN
V
OUT
OUT
FAN5602
C1+
C1-
C
B
C
7
5
3
4
C2-
GND
Figure 1. Typical Application Diagram
© 2005 Fairchild Semiconductor Corporation
FAN5602 Rev. 1.5.3
www.fairchildsemi.com