FAN54511
3.2 A Dual Input, Switch
Mode Charger with Power
Path
Description
www.onsemi.com
2
The FAN5451x family of chargers includes an I C controlled 3.2 A
USB−compliant switch−mode charger.
To facilitate fast system startup, the IC includes an optimized Power
Path circuit which also accurately measures battery currents during
charging and provides low impedance during discharge.
The charging parameters and operating modes are programmable
VIN
2
PMID
REG
LDO
VBUS
CBUS
C
through an I C Interface. Charge status is reported back to the host
IN
2
CMID
through the I C port and the / STAT pin.
D+ /GPO1
CREG
SYS USB
PHY
The FAN5451x provides battery charging in three modes:
Pre−Charge (IPP), Constant Current (CC) and Constant Voltage (CV).
The charger can automatically restart the charge cycle when the
battery falls below a restart voltage threshold. If the input source is
removed, the IC enters a high−impedance mode, blocking battery
current from leaking to either input.
D−/ GPO2
CLDO1
BOOT
VSYS
VSYS
To
System
CBOOT
D1
SW
L1
RD
SYS
/STAT
CSYS
BAT
FAN5451x
CBAT
ILIM
DIS
BATSNS
NTC
SDA
The FAN5451x is available in a 63−bump, 0.4 mm pitch WLCSP
package.
RREF
REF
CREF
SCL
/INT
Battery
T
+
R
PU
/BUSOK
/INOK
To
PMIC
/SHIP
Features
• Fully Integrated, High−Efficiency Charger for Single−Cell Li−Ion
and Li−Polymer Battery Packs
AGND
PGND
• Power Path Circuit ensures Fast System Startup with a Dead Battery
Figure 1. Typical Application
• 95% Charge Efficiency
• Charge Current Programmable up to 3.2 A
• 10 mV Float Voltage Accuracy
ORDERING INFORMATION
•
5% Charge Current Regulation Accuracy
See detailed ordering and shipping information on page 2 of
this data sheet.
• 5 V, 1.5 A Boost Mode for USB OTG
• 22 V DC Withstand Voltage on VBUS
• 13.25 V Maximum Input Operating Voltage
• −2 V Input Reverse Polarity Protection
Benefits
• Secondary Input for Wireless Charging
• Pin or Software Configurable Hardware Reset for
Quick System Restart
• Battery Temperature Sensing Ensures Safe−To−Charge
Operation (JEITA)
• Dynamic Input Voltage Control (DIVC) for Operation
with Weak Adapters
• USB BC1.2 Compatible
• Programmable 10 mA LDO
• Programmable Safety Timer with Reset Control
• Pin Configurable Ship Mode prevents Battery
Discharge to System Load
• Thermal Shutdown and Programmable Thermal
Regulation
2
• High−Speed I C Interface
(3.4 Mb/s) with Fast Mode Plus Compatibility
Applications
• Smart Phones
• Tablets
• e−Books
• Li Ion Powered Devices
© Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
April, 2018 − Rev. 4
FAN54511/D