EvaluationBoardforLowCost,LowPower,
CMOSGerneralPurposeDualAnalogFrontEnd
a
EVAL-AD73322EB
FEATURES
I N T R O D U C T I O N
T he AD 73322 is a dual front-end processor for general
purpose applications including speech and telephony. It
features two 16-bit A/D conversion channel and two 16-bit D/
A conversion channel. Each channel provides 70 dB signal-
to-noise ratio over a voiceband signal bandwidth.
Up to 4 CODECS (2 Devices)Can Be Configured In
Cascade.
Interfaces To The ADSP-2181 EZ-KIT LITE.
Stand Alone Capabiliy.
T he AD73322 is suitable for a variety of applications in the
speech and telephony area including low bit rate, high quality
compression, speech enhancement, recognition and synthe-
sis. T he low group delay characteristic of the part makes it
suitable for single or multichannel active control applications.
Daughter Board for Quick Demo of CODECS
Various Link Options For Setting Configuration.
On Board +5V Regulator.
On Board Clock Generator.
T he gains of the A/D and D /A conversion channels are
programmable over 38dB and 21dB ranges respectively. An
on-chip reference voltage is included to allow single supply
operation. A serial port (SPORT ) allows easy interfacing of
single or cascaded devices to industry standard DSP engines.
On Board Anti-Aliasing.
E VAL-AD 73322E Z / E VAL-AD 73322E B
T he AD73322 Evaluation board can be supplied either
with or without an ADSP2181 EZ-KIT LIT E Board.
EVAL-AD 73322EZ contains an AD73322 evaluation board
and a modified EZ-KIT LIT E board. EVAL-AD 73322EB
contains an AD73322 evaluation board and the material
needed to modify a customers existing EZ-KIT LIT E
board.
T he AD73322 is available in both 28-lead SOIC and 44-lead
LQFP packages.
Full data on the AD73322 is available in the AD73322 data
sheet available from Analog Devices and should be consulted
in conjunction with this T echnical N ote when using the
Evaluation Board.
An existing EZ-KIT LIT E board can easily be modified to
interface with the EVAL-AD73322EB board by carrying out
the following modification:
Included on the evaluation board, along with the two AD73322
Codecs are a power supply circuit, a clock generator circuit,
a cascade selector circuit and a daughter board. T hese are
explained in detail on the next page.
- Solder the 40 pin right angle header (included in the EVAL-
AD 73322EB package) onto the EZ-KIT LIT E board in
position P3, pins 11-50, with the header pins facing the edge
of the board.
F UNC T IO NAL BLO C K D IAG RAM
Stereo Inputs (4x)
Power Supply
EZ-KIT
Connector
External
Connector
Codec1
Codec2
Cascade
Select Circuit
Push-button
Switch. (S1)
Clock Generator
REV. A
Inform ation furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assum ed by Analog Devices for
its use, nor for any infringem ents of patents or other rights of third
parties which m ay result from its use. No license is granted by
im plication or otherwise under any patent or patent rights of Analog
Devices.
© Analog Devices, Inc., 1998
One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106,
U.S.A. Tel: 617/329-4700
8703
Fax: 617/326-