Document 538-1
“PoE Plus” Magnetics
The ETH1-230L_1 is developed for high power PoE ap-
plications in support of the goals of the IEEE 802.3at-2009
standard.This module is designed for 2-pair cabling plants
at 30 Watts and two modules may be used for 4-pair
cabling in 60 Watt applications. It exceeds the return loss
requirements of Gbit Ethernet.
It has a minimum open-circuit inductance of 350 µH at an
offset current of 35 mA at 25°C ambient temperature, and
can handle 22.5 mA minimum dc offset at 85°C. Typical
temperature rise from 25°C ambient is 7°C with 800 mA
and 10°C with 1000 mA dc current applied to one center
tap of each isolation transformer. Winding to winding isola-
tion is 1500 Vrms. Ambient temperature range: –40°C to
+85°C with 1 A current.
Request free evaluation samples by contacting Coilcraft or
visiting www.coilcraft.com.
1. When ordering, please specify packaging code:
ETH1-230LD
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
TX+
6
5
9
TX+
TX–
10
Core material Ferrite
Terminations RoHS compliant tin-silver-copper over tin over nickel
over phos bronze
TX–
1 : 1
1 : 1
11
12
TXCT
TXCT
RXCT
4
3
Weight 3.0 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
RXCT
RX+
2
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
13
14
RX+
RX–
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
1
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332
RX–
inches
mm
Packaging 400/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick,
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Dimensions are in
Document 538-1 Revised 11/02/11