�ꢀꢁꢂꢃꢁꢄꢅꢆꢇꢈꢉꢅꢄꢈꢊꢆꢋꢈꢌꢁꢍꢎꢈꢁꢇꢏꢈꢌꢁꢐꢑꢍꢏꢒꢈꢌꢅꢇꢓꢆꢃꢄ
�ꢀꢁꢂ
�
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢁ
ꢆ
ꢇ
ꢃ
ꢈ
ꢃ
ꢉ
ꢊ
�ꢀꢀꢁꢂꢃꢃꢄꢄꢄꢅꢆꢁꢇꢈꢉꢊꢋꢌꢍꢀꢇꢋ�ꢅꢋꢍꢉꢎꢎꢎꢏꢐꢑꢑꢒꢎꢓꢔꢕꢖꢆꢁꢇꢈꢎꢎꢎꢏꢐꢑꢑꢒꢎꢓꢔꢕꢖꢗꢘꢙꢚ
INTRODUCTION
EQUIVALENT SCHEMATIC
ꢊꢏ
Fast, easy breadboarding of circuits using the PA241DW
and the PA15 are possible with the EK42 PC board. Mounting
holes are provided and the provision for standard banana jacks
simplifiesconnectionandtesting.Theamplifiermaybemounted
horizontally or vertically. Components are labeled on both sides
of the board for ease in probing.
ꢊꢋ
ꢊꢌ
ꢍꢏ
�ꢀ
ꢊꢓ
ꢊꢍꢏ
ꢍꢓ
ꢇꢈꢉꢅ
ꢍꢋ
ꢄꢅꢆ
ꢍꢌ
A multitude of circuit configurations are possible, so only
several component locations have specific functions and will
usually always be necessary:
ꢍꢒ
ꢍꢔ
ꢏꢐ
ꢕ
ꢑ
ꢓ
ꢏ
ꢍꢑ
ꢊꢑ
ꢎ
ꢁꢂꢃ
ꢄꢅꢆ
ꢇꢀ
ꢍꢎ
ꢔ
ꢋ
ꢍꢕ ꢍꢏꢐ
C5,C7 Power supply bypasses MUST be used. Usually
ceramic types of 0.01 to 0.1µF.
ꢊꢍꢋ
ꢊꢏꢐ
ꢍꢏꢏ
�ꢉꢅ
ꢊꢏꢋ
ꢊꢏꢏ
R1
R2
Feedback resistor.
Input resistor.
ꢊꢎ
R9, C11 Compensation (see amplifier data sheet).
R5
R7
Current limit (see amplifier data sheet).
Most often used as input bias current return for +input
in non-inverting circuits.
R3, C6 Noise gain compensation. Necessary only occasion-
ally, see Application Notes 19 and 25.
High voltages will be present.
Use caution in handling and
probing when power is applied.
CAUTION
Thefollowinglocationsshouldbejumperedunlessused(their
most common anticipated function is listed).
R4, R8 Input protection.
R11
R6
General purpose.
Output current sense.
The function of any other components is up to the designer’s
needs and imagination.
ꢂꢌꢙꢝ
ꢘꢖꢌꢙꢞꢞ
ꢐ
ꢐ
ꢕꢄꢈꢙ
ꢈꢒꢄꢕ
ꢅꢚ
ꢈꢙꢄꢕ
ꢅꢚ
ꢅꢁ
ꢅꢁ
ꢈꢂ
ꢈꢂ
ꢅꢂ
ꢈꢖ
ꢈꢐꢐ
ꢈꢐꢐ
ꢕꢄꢈꢒ
ꢃꢆ
ꢃꢆ
ꢅꢂ
ꢃꢎꢔ
ꢃꢎꢔ
ꢈꢅꢐ
ꢈꢅꢂ
ꢈꢅꢐ
ꢈꢅꢂ
ꢈꢖ
ꢅꢖ
ꢅꢖ
ꢅꢘ
ꢅꢘ
ꢅꢗ
ꢈꢘ
ꢅꢗ
ꢈꢘ
ꢉꢛꢜ
ꢉꢛꢜ
ꢈꢐꢂ
ꢈꢐ
ꢈꢐꢂ
ꢈꢐ
ꢖꢌꢙꢝ
ꢗꢗꢌꢚꢞꢞ
ꢅꢐꢑ
ꢅꢙ
ꢅꢐꢑ
ꢅꢙ
ꢅꢒ
ꢅꢒ
ꢅꢐ
ꢅꢐ
ꢓꢔꢏ
ꢕꢎꢔ
ꢓꢔꢏ
ꢕꢆ
ꢓꢔꢏ
ꢕꢆ
ꢓꢔꢏ
ꢕꢎꢔ
ꢅꢐꢐ
ꢈꢐꢑ
ꢅꢐꢐ
ꢈꢐꢑ
�ꢀꢁꢂꢃꢂꢄꢅ�ꢆꢄꢇ
ꢈꢉꢊꢋꢌꢄꢍꢎꢏ�
�ꢀꢁꢂ
ꢅ�ꢆꢄꢇ
NOTE: Illustration only, not to exact scale.
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com
EK42U REV C NOVEMBER 2004 © 2004 Apex Microtechnology Corp.
1