COVER
PRELIMINARY DATA SHEET
4G bits DDR3 SDRAM
EDJ4204BFBG (1024M words × 4 bits)
EDJ4208BFBG (512M words × 8 bits)
EDJ4216BFBG (256M words × 16 bits)
Specifications
Features
• Density: 4G bits
• Organization
• Double-data-rate architecture: two data transfers per
clock cycle
• The high-speed data transfer is realized by the 8 bits
prefetch pipelined architecture
• Bi-directional differential data strobe (DQS and /DQS)
is transmitted/received with data for capturing data at
the receiver
— 128M words × 4 bits × 8 banks (EDJ4204BFBG)
— 64M words × 8 bits × 8 banks (EDJ4208BFBG)
— 32M words × 16 bits × 8 banks (EDJ4216BFBG)
• Package
— 78-ball FBGA (EDJ4204BFBG, EDJ4208BFBG)
— 96-ball FBGA (EDJ4216BFBG)
— Lead-free (RoHS compliant) and Halogen-free
• Power supply: VDD = 1.5V 0.075V
• Data rate
• DQS is edge-aligned with data for READs; center-
aligned with data for WRITEs
• Differential clock inputs (CK and /CK)
• DLL aligns DQ and DQS transitions with CK transitions
• Commands entered on each positive CK edge; data
and data mask referenced to both edges of DQS
— 1866Mbps/1600Mbps/1333Mbps (max)
• 1KB page size
• Data mask (DM) for write data
— Row address: A0 to A15
— Column address: A0 to A9, A11 (EDJ4204BFBG)
A0 to A9 (EDJ4208BFBG)
• Posted /CAS by programmable additive latency for
better command and data bus efficiency
• On-Die Termination (ODT) for better signal quality
— Synchronous ODT
— Dynamic ODT
— Asynchronous ODT
• Multi Purpose Register (MPR) for pre-defined pattern
read out
• ZQ calibration for DQ drive and ODT
• Programmable Partial Array Self-Refresh (PASR)
• /RESET pin for Power-up sequence and reset function
• SRT range:
• 2KB page size (EDJ4216BFBG)
— Row address: A0 to A14
— Column address: A0 to A9
• Eight internal banks for concurrent operation
• Interface: SSTL_15
• Burst length (BL): 8 and 4 with Burst Chop (BC)
• Burst type (BT):
— Sequential (8, 4 with BC)
— Interleave (8, 4 with BC)
• /CAS Latency (CL): 5, 6, 7, 8, 9, 10, 11, 13
• /CAS Write Latency (CWL): 5, 6, 7, 8, 9
— Normal/extended
• Programmable Output driver impedance control
• Precharge: auto precharge option for each burst
access
• Driver strength: RZQ/7, RZQ/6 (RZQ = 240Ω)
• Refresh: auto-refresh, self-refresh
• Refresh cycles
— Average refresh period
7.8µs at 0°C ≤ TC ≤ +85°C
3.9µs at +85°C < TC ≤ +95°C
• Operating case temperature range
— TC = 0°C to +95°C
Document. No. E1923E20 (Ver. 2.0)
Date Published January 2013 (K) Japan
Printed in Japan
URL: http://www.elpida.com
©Elpida Memory, Inc. 2012-2013