是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 包装说明: | HVQCCN, LCC36,.25SQ,20 |
Reach Compliance Code: | compliant | ECCN代码: | 5A991.B.1 |
HTS代码: | 8542.39.00.01 | Factory Lead Time: | 6 weeks |
风险等级: | 1.53 | 差分输出: | YES |
高电平输入电流最大值: | 0.00001 A | 接口集成电路类型: | LINE TRANSCEIVER |
JESD-30 代码: | S-XQCC-N36 | JESD-609代码: | e3 |
湿度敏感等级: | 3 | 功能数量: | 1 |
端子数量: | 36 | 最高工作温度: | 85 °C |
最低工作温度: | -40 °C | 输出特性: | DIFFERENTIAL |
输出极性: | COMPLEMENTARY | 封装主体材料: | UNSPECIFIED |
封装代码: | HVQCCN | 封装等效代码: | LCC36,.25SQ,20 |
封装形状: | SQUARE | 封装形式: | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
峰值回流温度(摄氏度): | 260 | 电源: | 3.3 V |
认证状态: | Not Qualified | 最大接收延迟: | |
接收器位数: | 1 | 子类别: | Line Driver or Receivers |
标称供电电压: | 3.3 V | 电源电压1-最大: | 3.465 V |
电源电压1-分钟: | 3.15 V | 电源电压1-Nom: | 3.3 V |
表面贴装: | YES | 温度等级: | INDUSTRIAL |
端子面层: | Matte Tin (Sn) | 端子形式: | NO LEAD |
端子节距: | 0.5 mm | 端子位置: | QUAD |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | Base Number Matches: | 1 |
型号 | 品牌 | 替代类型 | 描述 | 数据表 |
DS25MB100TSQ/NOPB | TI |
完全替代 |
具有发送预加重和接收均衡功能的 2.5Gbps 2:1/1:2 CML 多路复用器/缓冲器 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
DS25MB200 | TI |
获取价格 |
具有发送预加重和接收均衡功能的双路 2.5Gbps 2:1/1:2 CML 多路复用器/缓 | |
DS25MB200 | NSC |
获取价格 |
Dual 2.5 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre- Emphasis and Receive Equalization | |
DS25MB200_07 | NSC |
获取价格 |
Dual 2.5 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre-Emphasis and Receive Equalization | |
DS25MB200_08 | NSC |
获取价格 |
Dual 2.5 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre- Emphasis and Receive Equalization | |
DS25MB200TSQ | NSC |
获取价格 |
Dual 2.5 Gb/s 1:2 Mux/Buffer with Input Equalization and Output Pre-Emphasis | |
DS25MB200TSQ/NOPB | NSC |
获取价格 |
IC DUAL LINE TRANSCEIVER, QCC48, 7 X 7 MM, 0.80 MM HEIGHT, 0.50 MM PITCH, ROHS COMPLIANT, | |
DS25MB200TSQ/NOPB | TI |
获取价格 |
具有发送预加重和接收均衡功能的双路 2.5Gbps 2:1/1:2 CML 多路复用器/缓 | |
DS25Q4AA-13IA1 | DOSILICON |
获取价格 |
8 pin 208mil SOIC | |
DS25Q4AA-13IA4 | DOSILICON |
获取价格 |
8 contact 6x5 WSON | |
DS25SBGT-M-H | AUK |
获取价格 |
D Type Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Lug Terminal, Hole .112- |