Applicable standard
Operating
Storage
temperature range
Storage
humidity range
Voltage
-55 C to +105C (Note1)
20% to 80% (Note2)
DF63-3S-3.96C
-10 C to +60C (Note3)
temperature range
Operating
Rating
40% to 70% (Note3)
humidity range
Applicable connector
AC/DC
630V
Current
AWG #16 : 15A AWG #18 : 13A
AWG #20 : 11A AWG #22 : 9A
Rated Voltage
600V AC/DC
300V AC/DC
Rated Current
See above
See above
Overvoltage Category
IP-Degree
UL,C-UL
TÜV
-
-
IP00
Ⅱ
Specifications
Test method
Item
Requirements
QT AT
Construction
General examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
Marking
X
Electric characteristics
Contact resistance
10 m MAX.
-
-
-
20mV MAX, 1mA (DC or 1000Hz).
X
X
X
Insulation resistance
Voltage proof
500 V DC.
1000 M MIN.
1500 V AC for 1 min.
No flashover or breakdown.
Mechanical characteristics
Mechanical operation
50 times insertion and extraction.
①Contact resistance: 20 mΩ MAX.
②No damage, crack or looseness of parts.
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
①No electrical discontinuity of 1μs.
②No damage, crack or looseness of parts.
-
-
-
X
X
X
Vibration
Frequency 10 to 55 Hz, single amplitude
0.75 mm, at 10 cycles for 3 direction.
Shock
490 m/s2 duration of pulse 11 ms at 3 times each for 3 both
axial directions.
Environmental characteristics
Damp heat
Exposed at 40 ± 2℃ , 90 to 95 %, 96 h.
①Contact resistance: 20 mΩ MAX.
②Insulation resistance: 500 M MIN.
③No damage, crack or looseness of parts.
①Contact resistance: 20 mΩ MAX.
②Insulation resistance: 1000 M MIN.
③No damage, crack or looseness of parts.
-
-
X
X
(Steady state)
(After leaving the room temperature for
1-2h.)
Rapid change of temperature Temperature -55℃→ +85℃
Time 30min→ 30min
Under 5 cycles.
(The transferring time of the tank is 2-3 min)
(After leaving the room temperature for 1-2h.)
1)Solder bath method
Soldered at solder temperature,
260c for in immersion , duration, 5s.
2)Manual soldering
Resistance to
Soldering heat
Such as impaired function ,no deformation of case
of excessive looseness of the terminals.
2
2
X
X
-
-
Soldering iron temperature :300℃,
Soldering time :3s.
No strength on contact.
Solderability
Soldered at solder temperature,
245c for in immersion , duration, 5 s.
Note 1: Include the temperature rising by current.
Note 2: No condensing.
A new uniform coating of solder shall cover
minimum of 95 of the surface being immersed.
Note 3: Apply to the condition of long term storage for unused products before mounted on PCB.
After mounted on PCB, operation temperature and humidity range is applied for interim storage during transportation.
Count
Description of revisions
Designed
Checked
Date
2
2
DIS-H-00005520
TO.KUROMATSU
SZ.ONO
20191202
20180129
20180129
20180129
20180129
△
Remarks
Approved
Checked
Designed
Drawn
HS.OKAWA
TS.FUKUSHIMA
TS.KUMAZAWA
TS.KUMAZAWA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing no.
ELC-374387-01-00
Part no.
DF63M-2P-7.92DSA(01)
Specification sheet
2
△
1/1
Hirose electric co., ltd.
Code no.
CL680-0581-0-01
FORM HD0011-2-1