15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
DF63 Series
(UL, C-UL,TÜV, Listed)
Unique locking
mechanism is
contained inside
the header
Guide keys
prevent incorrect
insertion
Socket and header
design avoids
short-circuit between
adjacent contacts.
Guide pins
temporarily hold
and assure proper
orientation of the
connector.
Fig. 1
Features
■
Lock structure
1. Rated for up to 15A
[A-A]
Crimp contact
DF63 has the capacity to handle a max of 15A when
using 16 AWG wire.
Lock portions of the
plug and the header
start to engage.
(Please refer to the chart for the rated current in other pin counts.)
A
2. Secure mating and clear tactile click
A
The locking mechanism delivers a clear and tactile
click, which prevents incomplete mating. (Fig. 2)
3. Prevents incomplete insertion of the crimp contact
No contact yet
A structure to prevent incomplete insertion of the
crimp contacts is provided. (Fig. 3)
4. Prevents incorrect mating
Fig. 2
Header contact
A mechanism has been added to prevent reverse
mating and incorrect mating between different number
of positions.(Fig. 4)
Prevention of insufficient insertion of the crimp contact
5. Reverse mounting prevention to PCB
Crimp contact
(insufficiently inserted)
The pin header is equipped with a guide post to
prevent reverse insertion on the PCB. (Fig. 1)
Lock does
not work.
6. Molded lance design
The lance is actually part of the housing instead of being a part
of the terminal. This prevents tangled wires during assembly.
7. Short-circuit prevention
The wall structure between the contacts helps to isolate the
contacts and prevents short circuits between contacts. (Fig. 1)
Lance and header
protection mechanism
8. Suitable for potting
meet.
Fig. 3
Capable of being potted, up to 5mm.
9. Solder crack prevention
Keying options are available to prevent incorrect connections
due to the use of multiple connectors on the same board.
Glass-reinforced resin is used on the pin header to
prevent solder cracks due to thermal contraction.
Standard type (color: black)
■
10. GlowWire compliance (Compliant with IEC 60695-2-11)
* Keying options were provided to prevent incorrect connections.
Keying options prevent incorrect connections due to the use of multiple
connectors on the same board. When using identical pin counts, two
versions are available with different keying options.(Fig. 4)
R-type (color: white)
■
* Supports 7.92mm pitch
Also supports 7.92mm pitch with 2 or 3 pos. without pins
Note 1 : * means the product will be available upon request.
Please contact Hirose representative.
Fig. 4
1
2015.11w