Datasheet > 存储 > SRAM> CY7C1566KV18-550BZXC

CY7C1566KV18-550BZXC

更新时间： 2024-11-23 06:51:47

品牌	Logo	应用领域
赛普拉斯 - CYPRESS		存储内存集成电路静态存储器双倍数据速率
页数	文件大小	规格书
28页	814K
描述
72-Mbit DDR-II+ SRAM 2-Word Burst Architecture

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

CY7C1566KV18-550BZXC 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	BGA	包装说明：	LBGA,
针数：	165	Reach Compliance Code：	compliant
ECCN代码：	3A991.B.2.A	HTS代码：	8542.32.00.41
风险等级：	5.84	最长访问时间：	0.29 ns
其他特性：	PIPELINED ARCHITECTURE	JESD-30 代码：	R-PBGA-B165
长度：	15 mm	内存密度：	67108864 bit
内存集成电路类型：	DDR SRAM	内存宽度：	8
功能数量：	1	端子数量：	165
字数：	8388608 words	字数代码：	8000000
工作模式：	SYNCHRONOUS	最高工作温度：	70 °C
最低工作温度：		组织：	8MX8
封装主体材料：	PLASTIC/EPOXY	封装代码：	LBGA
封装形状：	RECTANGULAR	封装形式：	GRID ARRAY, LOW PROFILE
并行/串行：	PARALLEL	认证状态：	Not Qualified
座面最大高度：	1.4 mm	最大供电电压 (Vsup)：	1.9 V
最小供电电压 (Vsup)：	1.7 V	标称供电电压 (Vsup)：	1.8 V
表面贴装：	YES	技术：	CMOS
温度等级：	COMMERCIAL	端子形式：	BALL
端子节距：	1 mm	端子位置：	BOTTOM
宽度：	13 mm	Base Number Matches：	1

CY7C1566KV18-550BZXC 数据手册

浏览型号CY7C1566KV18-550BZXC的Datasheet PDF文件第2页

浏览型号CY7C1566KV18-550BZXC的Datasheet PDF文件第3页

浏览型号CY7C1566KV18-550BZXC的Datasheet PDF文件第4页

浏览型号CY7C1566KV18-550BZXC的Datasheet PDF文件第5页

浏览型号CY7C1566KV18-550BZXC的Datasheet PDF文件第6页

浏览型号CY7C1566KV18-550BZXC的Datasheet PDF文件第7页

CY7C1566KV18, CY7C1577KV18

CY7C1568KV18, CY7C1570KV18

PRELIMINARY

72-Mbit DDR-II+ SRAM 2-Word Burst

Architecture (2.5 Cycle Read Latency)

Features

Configurations

■ 72 Mbit density (8M x 8, 8M x 9, 4M x 18, 2M x 36)

■ 550 MHz clock for high bandwidth

With Read Cycle Latency of 2.5 cycles:

CY7C1566KV18 – 8M x 8

CY7C1577KV18 – 8M x 9

■ 2-word burst for reducing address bus frequency

CY7C1568KV18 – 4M x 18

CY7C1570KV18 – 2M x 36

■ Double Data Rate (DDR) interfaces

(data transferred at 1100 MHz) at 550 MHz

■ Available in 2.5 clock cycle latency

Functional Description

■ Two input clocks (K and K) for precise DDR timing

❐ SRAM uses rising edges only

The CY7C1566KV18, CY7C1577KV18, CY7C1568KV18, and

CY7C1570KV18 are 1.8V Synchronous Pipelined SRAMs

equipped with DDR-II+ architecture. The DDR-II+ consists of an

SRAM core with advanced synchronous peripheral circuitry.

Addresses for read and write are latched on alternate rising

edges of the input (K) clock. Write data is registered on the rising

edges of both K and K. Read data is driven on the rising edges

of K and K. Each address location is associated with two 8-bit

words (CY7C1566KV18), 9-bit words (CY7C1577KV18), 18-bit

words (CY7C1568KV18), or 36-bit words (CY7C1570KV18) that

burst sequentially into or out of the device.

■ Echo clocks (CQ and CQ) simplify data capture in high-speed

systems

■ Data valid pin (QVLD) to indicate valid data on the output

■ Synchronous internally self-timed writes

■ DDR-II+ operates with 2.5 cycle read latency when DOFF is

asserted HIGH

■ Operates similar to DDR-I device with 1 cycle read latency

Asynchronous inputs include an output impedance matching

input (ZQ). Synchronous data outputs (Q, sharing the same

physical pins as the data inputs D) are tightly matched to the two

output echo clocks CQ/CQ, eliminating the need for separately

capturing data from each individual DDR SRAM in the system

design.

when DOFF is asserted LOW

[1]

■ Core V_DD= 1.8V ± 0.1V; IO V_DDQ= 1.4V to V_DD

❐ Supports both 1.5V and 1.8V IO supply

■ HSTL inputs and variable drive HSTL output buffers

■ Available in 165-Ball FBGA package (13 x 15 x 1.4 mm)

■ Offered in both Pb-free and non Pb-free packages

■ JTAG 1149.1 compatible test access port

All synchronous inputs pass through input registers controlled by

the K or K input clocks. All data outputs pass through output

registers controlled by the K or K input clocks. Writes are

conducted with on-chip synchronous self-timed write circuitry.

■ Phase-Locked Loop (PLL) for accurate data placement

Table 1. Selection Guide

Description

Maximum Operating Frequency

Maximum Operating Current

550 MHz

500 MHz

500

450 MHz

450

400 MHz

400

Unit

MHz

550

740

760

970

690

630

580

690

630

580

x18

x36

700

650

590

890

820

750

Note

1. The Cypress QDR-II+ devices surpass the QDR consortium specification and can support V

= 1.4V to V

DDQ

Cypress Semiconductor Corporation

Document Number: 001-15880 Rev. *D

•

198 Champion Court

•

San Jose, CA 95134-1709

•

408-943-2600

Revised April 24, 2009

[+] Feedback

12 3 4 5 6 7...28

中文翻译

下载PDF

与CY7C1566KV18-550BZXC相关器件

型号	品牌	获取价格	描述	数据表
CY7C1566KV18-550BZXI	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture
CY7C1566V18	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18_08	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-300BZC	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-300BZI	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-300BZXC	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-300BZXI	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-333BZC	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-333BZI	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)
CY7C1566V18-333BZXC	CYPRESS	获取价格	72-Mbit DDR-II+ SRAM 2-Word Burst Architecture (2.5 Cycle Read Latency)

与CY7C1566KV18-550BZXC相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

36
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

28
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

56
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

53

产品中心

服务支持

精选活动

关于我们

帮助中心

CY7C1566KV18-550BZXC

CY7C1566KV18-550BZXC 技术参数

CY7C1566KV18-550BZXC 数据手册

与CY7C1566KV18-550BZXC相关器件

与CY7C1566KV18-550BZXC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

CY7C1566KV18-550BZXC

CY7C1566KV18-550BZXC 技术参数

CY7C1566KV18-550BZXC 数据手册

与CY7C1566KV18-550BZXC相关器件

与CY7C1566KV18-550BZXC相关文章

您还可以找

您在本页遇到什么问题？