CY7C1481V33
CY7C1483V33
CY7C1487V33
72-Mbit (2M x 36/4M x 18/1M x 72)
Flow-Through SRAM
Features
Functional Description[1]
• Supports 133 MHz bus operations
• 2M x 36/4M x 18/1M x 72 common IO
The CY7C1481V33/CY7C1483V33/CY7C1487V33 is a 3.3V,
2M x 36/4M x 18/1M x 72 Synchronous Flow-through SRAM
designed to interface with high speed microprocessors with
minimum glue logic. Maximum access delay from clock rise is
6.5 ns (133 MHz version). A two-bit on-chip counter captures
the first address in a burst and increments the address
automatically for the rest of the burst access. All synchronous
• 3.3V core power supply (VDD
)
• 2.5V or 3.3V I/O supply (VDDQ
• Fast clock-to-output times
— 6.5 ns (133 MHz version)
)
inputs are gated by registers controlled by
a
• Provide high-performance 2-1-1-1 access rate
• User selectable burst counter supporting Intel® Pentium®
interleaved or linear burst sequences
positive-edge-triggered Clock Input (CLK). The synchronous
inputs include all addresses, all data inputs, address-pipelining
Chip Enable (CE1), depth-expansion Chip Enables (CE2 and
CE3), Burst Control inputs (ADSC, ADSP, and ADV), Write
Enables (BWx and BWE), and Global Write (GW).
Asynchronous inputs include the Output Enable (OE) and the
ZZ pin.
• Separate processor and controller address strobes
• Synchronous self timed write
• Asynchronous output enable
• CY7C1481V33, CY7C1483V33 available in
JEDEC-standard Pb-free 100-pin TQFP, Pb-free and
non-Pb-free 165-ball FBGA package. CY7C1487V33
available in Pb-free and non-Pb-free 209 ball FBGA
package
The CY7C1481V33/CY7C1483V33/CY7C1487V33 allows
either interleaved or linear burst sequences, selected by the
MODE input pin. A HIGH selects an interleaved burst
sequence, while a LOW selects a linear burst sequence. Burst
accesses can be initiated with the Processor Address Strobe
(ADSP) or the cache Controller Address Strobe (ADSC)
inputs. Address advancement is controlled by the Address
Advancement (ADV) input.
• IEEE 1149.1 JTAG-Compatible Boundary Scan
• “ZZ” Sleep Mode option
Addresses and chip enables are registered at rising edge of
clock when either Address Strobe Processor (ADSP) or
Address Strobe Controller (
burst addresses can be internally generated as controlled by
the Advance pin (ADV).
) are active. Subsequent
ADSC
The CY7C1481V33/CY7C1483V33/CY7C1487V33 operates
from a +3.3V core power supply while all outputs may operate
with either a +2.5 or +3.3V supply. All inputs and outputs are
JEDEC standard JESD8-5 compatible.
Selection Guide
133 MHz
6.5
100 MHz
8.5
Unit
ns
Maximum Access Time
Maximum Operating Current
Maximum CMOS Standby Current
335
305
mA
mA
150
150
Note
1. For best practices recommendations, refer to the Cypress application note AN1064, SRAM System Guidelines.
Cypress Semiconductor Corporation
Document #: 38-05284 Rev. *H
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised May 01, 2007
[+] Feedback