CY62167EV18 MoBL®
16-Mbit (1 M × 16) Static RAM
16-Mbit (1
M × 16) Static RAM
automatic power down feature that reduces power consumption
by 99 percent when addresses are not toggling. Place the device
into standby mode when deselected (CE1 HIGH or CE2 LOW or
both BHE and BLE are HIGH). The input and output pins (I/O0
through I/O15) are placed in a high impedance state when: the
device is deselected (CE1HIGH or CE2 LOW); outputs are
disabled (OE HIGH); both Byte High Enable and Byte Low
Enable are disabled (BHE, BLE HIGH); and a write operation is
in progress (CE1 LOW, CE2 HIGH and WE LOW).
Features
■ Very high speed: 55 ns
■ Wide voltage range: 1.65 V to 2.25 V
■ Ultra low standby power
❐ Typical standby current: 1.5 A
❐ Maximum standby current: 12 A
■ Ultra low active power
❐ Typical active current: 2.2 mA at f = 1 MHz
To write to the device, take Chip Enables (CE1 LOW and CE2
HIGH) and Write Enable (WE) input LOW. If Byte Low Enable
(BLE) is LOW, then data from I/O pins (I/O0 through I/O7) is
written into the location specified on the address pins (A0 through
A19). If Byte High Enable (BHE) is LOW, then data from I/O pins
(I/O8 through I/O15) is written into the location specified on the
address pins (A0 through A19).
■ Easy memory expansion with CE1, CE2, and OE features
■ Automatic power down when deselected
■ CMOS for optimum speed and power
■ Offered in Pb-free 48-ball very fine ball grid array (VFBGA)
packages
To read from the device, take Chip Enables (CE1 LOW and CE2
HIGH) and Output Enable (OE) LOW while forcing the Write
Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data
from the memory location specified by the address pins appears
on I/O0 to I/O7. If Byte High Enable (BHE) is LOW, then data from
memory appears on I/O8 to I/O15. See the Truth Table on page
11 for a complete description of read and write modes.
Functional Description
The CY62167EV18 is a high performance CMOS static RAM
organized as 1M words by 16 bits. This device features
advanced circuit design to provide ultra low active current. This
is ideal for providing More Battery Life (MoBL®) in portable
applications such as cellular telephones. The device also has an
For a complete list of related documentation, click here.
Logic Block Diagram
DATA IN DRIVERS
A10
A 9
A 8
A 7
A 6
A 5
1M × 16
RAM ARRAY
I/O0–I/O7
A 4
I/O8–I/O15
A 3
A 2
A 1
A 0
COLUMN DECODER
BHE
WE
CE2
CE
CE2
CE
1
PowerDown
Circuit
1
OE
BHE
BLE
BLE
Cypress Semiconductor Corporation
Document Number: 38-05447 Rev. *O
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised January 16, 2015