CY14C256Q
CY14B256Q
CY14E256Q
256-Kbit (32 K × 8) SPI nvSRAM
256-Kbit (32
K × 8) SPI nvSRAM
■ Industry standard configurations
❐ Operating voltages:
Features
■ 256-Kbit nonvolatile static random access memory (nvSRAM)
• CY14C256Q: VCC = 2.4 V to 2.6 V
• CY14B256Q: VCC = 2.7 V to 3.6 V
• CY14E256Q: VCC = 4.5 V to 5.5 V
❐ Industrial temperature
❐ 8- and 16-pin small outline integrated circuit (SOIC) package
❐ Restriction of hazardous substances (RoHS) compliant
internally organized as 32 K × 8
❐ STORE to QuantumTrap nonvolatile elements initiated
automatically on power-down (AutoStore) or by using SPI
instruction (Software STORE) or HSB pin (Hardware
STORE)
❐ RECALL to SRAM initiated on power-up (Power-Up
RECALL) or by SPI instruction (Software RECALL)
Functional Overview
❐ Support automatic STORE on power-down with a small
capacitor (except for CY14X256Q1A)
The Cypress CY14X256Q combines a 256-Kbit nvSRAM[1] with
a nonvolatile element in each memory cell with serial SPI
interface. The memory is organized as 32 K words of 8 bits each.
The embedded nonvolatile elements incorporate the
QuantumTrap technology, creating the world’s most reliable
nonvolatile memory. The SRAM provides infinite read and write
cycles, while the QuantumTrap cells provide highly reliable
nonvolatile storage of data. Data transfers from SRAM to the
nonvolatile elements (STORE operation) takes place
automatically at power-down (except for CY14X256Q1A). On
power-up, data is restored to the SRAM from the nonvolatile
memory (RECALL operation). You can also initiate the STORE
and RECALL operations through SPI instruction.
■ High reliability
❐ Infinite read, write, and RECALL cycles
❐ 1million STORE cycles to QuantumTrap
❐ Data retention: 20 years at 85 C
■ 40 MHz and 104 MHz High speed serial peripheral interface
(SPI)
❐ 40 MHz clock rate SPI write and read with zero cycle delay
❐ 104 MHz clock rate SPI write and SPI read (with special fast
read instructions)
❐ Supports SPI mode 0 (0,0) and mode 3 (1,1)
■ SPI access to special functions
❐ Nonvolatile STORE/RECALL
❐ 8-byte serial number
Configuration
❐ Manufacturer ID and Product ID
❐ Sleep mode
Feature CY14X256Q1A CY14X256Q2A CY14X256Q3A
AutoStore
No
Yes
Yes
Yes
Yes
■ Write protection
Software
STORE
Yes
❐ Hardware protection using Write Protect (WP) pin
❐ Software protection using Write Disable instruction
❐ Software block protection for 1/4, 1/2, or entire array
Hardware
STORE
No
No
Yes
■ Low power consumption
❐ Average active current of 3 mA at 40 MHz operation
❐ Average standby mode current of 150 A
❐ Sleep mode current of 8 A
Logic Block Diagram
VCC VCAP
Serial Number
8 x 8
Power Control
Block
Manufacturer ID /
Product ID
QuantumTrap
32 K x 8
SLEEP
STORE
SRAM
32 K x 8
RDSN/WRSN/RDID
READ/WRITE
STORE/RECALL/ASENB/ASDISB
SI
CS
Memory
RECALL
Data &
Address
Control
SPI Control Logic
Write Protection
Instruction decoder
SCK
WP
SO
WRSR/RDSR/WREN
Status Register
Note
1. This device will be referred to as nvSRAM throughout the document.
Cypress Semiconductor Corporation
Document Number: 001-65282 Rev. *E
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised July 24, 2012