GATEDRIVETRANSFORMERS
Outgassing Compliant Gate Drive Transformers
•ꢀ Designedꢀ forꢀ highꢀ switchingꢀ speed,ꢀ transformerꢀ coupledꢀ
MOSFET and IGBT gate drive circuits.
•ꢀ Operatingꢀfrequency:ꢀ50ꢀkHzꢀ–ꢀ2ꢀMHz
•ꢀ Primaryꢀ toꢀ secondaryꢀ isolation:ꢀ 1500ꢀVdc.ꢀ Forꢀ 1011ꢀ andꢀ
2011, isolation between secondaries is 500 Vdc.
Core material Ferrite
Terminations Tin-lead over tin over nickel over phos bronze.
Weight 535 – 580 mg
Ambient temperature –55°C to +125°C
Storage temperature Component: –55°C to +125°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 250/7″ reel Plastic tape: 16 mm wide, 0.36 mm thick,
20 mm pocket spacing, 5.54 mm pocket depth
PCB washing Only pure water or alcohol recommended
Turns
ratio
pri : sec
Primary
Leakage
Primary
Secondary
DCR max
(Ohms)
Volt-time SRF Capacitance
inductance1 inductance2 DCR max
product
(V-µsec) (MHz)
min3
pri to sec
max (pF)
Part number
min (µH)
max (µH)
(Ohms)
CP-N0531-1010SZ
CP-N0531-1510SZ
CP-N0531-1011SZ
CP-N0531-2011SZ
1:1
296.0
680.0
264.0
330.0
1.5
4.0
0.30
0.60
0.795
1.65
1.50
1.40
0.655
0.860
25.8
40.8
24.5
24.5
1.75
1.00
2.50
2.00
14.0
14.0
95.0
18.0
1.5:1
1:1:1
2:1:1
1.50 (2-5; 3-4)
0.650 (2-5); 0.790 (3-4)
Dot over pin 1
1. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
2. Leakage inductance measured at 100 kHz, 0.1 Vrms with secondary
pins shorted.
0.213
max
3. SRF is for the primary, measured with the secondary shorted using an
Agilent/HP 4192 or equivalent.
5,40
4. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.004/0,10
0.022
0.260
6,60
0,55
max
0.323
max
8,20
0.024
0,60
5,00
0.035
0,90
0.197
1010, 1510
1011, 2011
0.063
1,60
0.228
5,80
4
6
1
3
2
1
2
3
6
5
4
Pri
Sec
3
2
1
4
1
6
5
3
0.073
5
1,85
6
0.073
1,85
Pri
Sec
Recommended
Land Pattern
4
inches
mm
Dimensions are in
Document CP512 Revised 10/09/12
®
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
Fax 847-639-1508
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012